Rear lower control arms

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jay87LX

Full Access Members
Joined
Oct 2, 2011
Posts
532
Reaction score
25
Location
Cleveland oh
Are the rear lower control arms that are always rotting on this gen Expy, are the side specific? I am getting some parts from someone locally and one of the control arms are new, not sure if it's the side I need though
 

99 Expy

Full Access Members
Joined
Feb 19, 2010
Posts
1,016
Reaction score
2
Location
Laramie, WY
I am pretty sure they are, but your best bet would be to climb under and take a check. I think you can flip one over to get it to work. Also, you will need to cut off the bolt on the control arm that connects to the frame on the driver's side because it hits the gas tank. You will see when you get there. I replaced mine with the same length grade 8 5/8 bolt.
 

ktrjones12

Active Member
Joined
May 2, 2011
Posts
30
Reaction score
0
Location
New York
Are the rear lower control arm that are always rotting on this gen Expy, are the side specific? I am getting some parts from someone locally and one of the control arms are new, not sure if it's the side I need though

They do look pretty much the same. But I remember it correctly when I helped a friend of mine replaced his, they are the same side to side. You may need another member to confirm it though.
 
Last edited:

paul_smith_347

Active Member
Joined
Mar 21, 2012
Posts
37
Reaction score
0
Location
MO
Mine were the same side to side. I just replaced all four of mine (uppers and lowers) about a month ago. I had no troubles removing any of the bolts once they were broke loose. I did NOT have to cut out the bolt on drivers side by fuel tank on my 99 EB.
 

2000eb

Full Access Members
Joined
May 9, 2011
Posts
722
Reaction score
4
I didnt have to cut my bolt either. See if you can lift up on the tank a little I know its possible since I have rocks stuck between my tank and the tank straps I had more then enough room to pull the bolt right out
 
Top