Rear Wiper Mod For 07,08,09.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bricekin

Full Access Members
Joined
Aug 20, 2012
Posts
243
Reaction score
22
Location
South Bend, IN
I've noticed that the part numbers for the pieces are no longer on the main page. I'll post them tonight when I get around to doing mine later tonight.

EDIT - The part numbers needed are 9L1Z-17526-A and 9L1Z-17528-B.
 
Last edited:

igneous

Well-Known Member
Joined
Jan 13, 2013
Posts
52
Reaction score
5
Location
Texas
I just did mine for just over $30. The only thing I didn't like is the new piece that fits over the stud and gets the nut tightened over it is PLASTIC with no teeth. It's smooth on the inside and I hammered it on and tightened down as much as I could without breaking it.

The old arm I removed was metal with teeth to fit perfectly over the toothed stud.

New one worked fine when I tested it, just wonder if it's gonna eventually wear down plastic and require a rework.
 

Lar10

New Member
Joined
Mar 24, 2014
Posts
2
Reaction score
0
Location
Michigan
Couldn't read the part #'s you posted for some reason...
Could you re-post?
Thanks.

Forget it ... found it typed in later in the thread.
 
Last edited:

Quasar

Full Access Members
Joined
May 18, 2014
Posts
123
Reaction score
9
Location
Milwaukee, WI
I have a june 09 build 2009 expy eddie bauer. It looks as if I already have this wiper? Either previous owner did this mod or could it possibly have been a job 2 change over in late 2009?
 

svfetter

Full Access Members
Joined
Jul 12, 2012
Posts
139
Reaction score
10
Location
Louisville, KY
Don't need the thing anyway. Best mod is to remove it and cover the stud with a decorative cap. Way more attractive. I have done that on my past (2) Expeditions.
 

botts

Active Member
Joined
Feb 12, 2016
Posts
34
Reaction score
6
Location
AB, Canada
Was anyone able to find the little rubber gasket that goes over the 22mm nut?
 

Southbayaaron

Member
Joined
Mar 18, 2019
Posts
12
Reaction score
11
Location
Pacific NW
My 2009 rear wiper looks different (newer), but had the same issue. I shopped wiper blade assemblies and wiper blades and it was closer to $30. I opted for $12 cap solution and it went on in 5 seconds and looks good as new. The 2007 does look better with the newer arm.


Sent from my iPhone using Tapatalk
 

2010ELExpy4x4

Well-Known Member
Joined
Aug 6, 2018
Posts
68
Reaction score
23
Location
California
I took the pretty one off our 2010 and put the ugly 2007 one on. Now I can buy a regular blade from Walmart for a couple of bucks instead of the Ford one for way more and that no place seems to carry.
 
Top