Sway bar link kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

speedrich

Active Member
Joined
Jun 22, 2010
Posts
25
Reaction score
1
Location
Lebel-sur-Quevillon, QC. Canada
Hi guys!

Is there anyone with the same situation as I?

I have a 2006 XLT 4x4 that is at around 102k. I had the front link kit changed at the stealership at 81000 miles about 1 1/2 year ago. The typical sound of a dead link kit started again, just before the holidays. And before this kit was installed, I had about the same millage on a set from NAPA, which is sort of a Oreilly here in Canada.

It seems like I'm always getting these changed over and over!!!! Am I alone in this situation??? :facepalm:
 

splintrcel

Full Access Members
Joined
Apr 22, 2012
Posts
583
Reaction score
58
Location
Milwaukee
i bought moog ones for like $30 from advance auto parts and we do have NAPA over here in america lol. mine broke in the summer of 2013 after 127000 ish miles. The new joints are holding up fine so far and were easy to install, the old broken ones didnt want to come out however so they had to be persuaded with a saw.
 

tonydiv

technical advisor
Joined
Sep 12, 2009
Posts
1,746
Reaction score
138
Location
Middle River, MD
Urethane link bushings will last longer. The important thing is to not over tighten them, as they will hammer themselves to death
 
OP
OP
speedrich

speedrich

Active Member
Joined
Jun 22, 2010
Posts
25
Reaction score
1
Location
Lebel-sur-Quevillon, QC. Canada
Thank you guys!

Sorry for the NAPA thing hahahhhh i'm so ignorant.....

I will install the new link kit myself and will make sure that I don't overtight the bolts! But still, I did went to the dealership (??????)
 
Top