Update all versions of Ford Sync 3 to the latest Sync 3.4
- Thread starter AAOO
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not sure. Small tweaks. If you are using an old hub(2016), Anything above 19200 has USB issues, so not sure what they are talking about. My guess would be it is on a specific model Ford. My 2020 has no issues.
Sent from my iPad using Tapatalk Pro
Gumby
Full Access Members
Been running 20021 for at least 2 months, no real issues. Perhaps the only small annoyance is *sometimes* at startup I get the "Bad USB cable or port" error but it doesn't seem to affect the port at all.
Gumby
Full Access Members
2018 Plati
Gumby
Full Access Members
Anyone update to 20136? Just wondering if I should go for it or not yet?
Did it a few days ago. If you are on 20021 and 19 Maps...here is the link to the files you need to just update straight to 20136.
https://community.cyanlabs.net/t/sync-3-4-20136-feedback-issues/774/4
Sent from my iPhone using Tapatalk Pro
Gumby
Full Access Members
Seems to transition between screens better.
No, on the format. The format is only needed if you want/need to change Maps. That is if you are already on 3.4. So if you are running 3.4 20021, follow that link, download the 2 files and follow the instructions for putting them on a drive.
Install takes 10 minutes vs WAY longer.
Sent from my iPhone using Tapatalk Pro
I bought the Forscan device, so now I need to purchase the Forscan software (I think?), I'm planning on trying some things out this weekend. Want to try little things first (double honk, etc) before tackling Sync!
