lift and add ons need help

[CKMustangCobra]

you don't NEED any lift to clear 33s (285-75-16) as evidenced by my truck. Running board delete, and a little trimming on the front valence.

That being said, after I get my re-gear done (4.56) and a 3" lift 35s are in my future!!

This is EXACTLY how I want my 97 to look.

If you have the time, please PM the mod list and if there was anything you would've done differently to make it all work easier. I need to keep the running boards though.

 

[panda24619]

that might be true for the 4wds. the 2wds are lower then 4wds stock. i think once he lifts his 2wd then 33s would fit.

 

[Racenut]

that might be true for the 4wds. the 2wds are lower then 4wds stock. i think once he lifts his 2wd then 33s would fit.

Exactly you would have to run the 3.5" spindle lift on the 2wd or you will not clear 33s. On the 4wd you can clear 33s with out a problem with no lift but not on the 2wd because they sit quite a bit lower.

 

[01expy]

so spindle lift from ebay and coil spacers. Would i be able to clear 33s with this setup

 

[01expy]

they have a spindle lift for 385 on ebay. that for front they also have front coil spacers idk bout those, but also 3 in coil spacers for the rear too

 

[panda24619]

get spindle lift and coil spacer for the rear. and you can clear 33s.

 

[01expy]

what size tires do you think these are, im tryin to make it look just like this:

 

[walnuts4x4]

my guess looks like a 5" RCD suspension lift running about a 35" tire....

also looks bigger due to the front valance being removed...

 

[panda24619]

they look like 34s or 35s. i would say 35s. to get that you would want the 5" lift that rcd has. walnuts posted a thread somewhere about it. they sell the kits at ORW.

 

[01expy]

so if i did a spindle in the front and rear coil spacers in the back with a bl that would look somewhat like that or close too it. Also i heard on another thread some guys talking about new shocks i think it was walnuts in not sure though. Just lemme know if you think itd be a good idea.