Removing face plate aorund radio - 2007

[tk1971]

That's exactly how I did it. That corner should pop right out. Once you get a corner out, you can stick whatever implement (finger, if it fits) in there and pry the rest of the clips off. The plastic does feel thin, but it is rather flexible. Good luck.

tk

 

[chevy24d]

Backup Camera Installation complete

I just finished the install of my backup camera. I ended up wiring the camera to the reverse light circuit at the trailer hitch wiring. The monitor is wired to the reverse light circuit that is in the passenger kick panel wiring. The reverse light wire is green/brown. I ended up combining the two power wires together so when I go into reverese, the power on the unit comes on, along with the trigger wire.

I mounted the monitor to the switch blanks on the console over the radio and ran the wires thru this same blank on the face of the console as shown in the pics.

http://s254.photobucket.com/albums/hh92/boatrboy/Expedition - 2007/?action=view&current=IMG_1780.jpg
http://s254.photobucket.com/albums/hh92/boatrboy/Expedition - 2007/?action=view&current=IMG_1778.jpg
http://s254.photobucket.com/albums/hh92/boatrboy/Expedition - 2007/?action=view&current=IMG_1779.jpg
http://s254.photobucket.com/albums/hh92/boatrboy/Expedition - 2007/?action=view&current=IMG_1776.jpg

 

[RaiderNations]

Nice work chevy24d.