stock axles

[robcriteser]

what are the stock axles in a 2001 eddie bauer full time 4wd automatic? thanks!

 

[nvycrmn]

well if you have the same truck as i do, its a 9.75 rear. if you crawl under there and look at the little tag on the pumpkin, it will tell you which one you have and what gears you have.

 

[robcriteser]

thanks! any idea on the front?

 

[nvycrmn]

8.8 front.

 

[97ExpGuy]

Just open your driver's side door and look at the tag. It will list the Axle code on there and will let you know what gear ratio you have and whether or not it is limited slip. As an EB, more than likely it is LS in the rear in a 9.75" housing but you won't know the ratio until you get the tag code.

 

[panda24619]

depends on engine. 5.4 is 9.75, 4.6 is 8.8, and front is 8.8.