switch for 2x aw 4x4h and 4x4l

[Terry]

I have noticed that I have one light that goes on when I use this switch. I only see the 4x4h light come on my dash when engaged. How can I check these or is this right?

Thanks
Terry

 

[Stoned06]

You should see the 4Hi and a 4Low light when engaged. The 2wd and 4Auto do not have any indicators (at least on my '06).
For 4 Low, you must be in neutral to engage. The light will not illuminate if not done properly.

 

[aircargoo]

boat looks touge heavy.....better watch your trans....

 

[Stoned06]

boat looks touge heavy.....better watch your trans....

Maybe a tad. I am probably right at the 600# limit, but at the time the pic was taken I had quite a bit of luggage in the rear too. That pic was taken on a 1200 mile trip from SC to WI, and it handled extremely well without any sway or light front-end. Unfortunately I cannot install a weight dist. hitch due to the configuration of the trailer.

 

[Never_Evil]

May we ask what year it is. On my 97 AWD, 4 hi and 4 lo all have their own lights.

 

[Terry]

Thank you very much and you where right. I wasn't putting it in neutral. Thanks very much.

You should see the 4Hi and a 4Low light when engaged. The 2wd and 4Auto do not have any indicators (at least on my '06).
For 4 Low, you must be in neutral to engage. The light will not illuminate if not done properly.

 

[06LimitedNJ]

boat looks touge heavy.....better watch your trans....

Maybe a tad. I am probably right at the 600# limit, but at the time the pic was taken I had quite a bit of luggage in the rear too. That pic was taken on a 1200 mile trip from SC to WI, and it handled extremely well without any sway or light front-end. Unfortunately I cannot install a weight dist. hitch due to the configuration of the trailer.

I was thinking the same thing.... the trailer tongue actually looks like it's bending in that pic