tekrsq
Latest activity Postings About
-
-
tekrsq replied to the thread Not wanting it to be a head gasket.Tried playing with the heater this weekend. Heat was normal, and didn't see any changes in engine temp one way or the other. -
I had an old 1991 Ford Explorer with a 4.0l v6. It ran well for a while then the temperatures started creeping up. It eventually got so...
-
tekrsq replied to the thread Not wanting it to be a head gasket.Yeah, honestly, I'm learning more towards cracked heads than a cracked head gasket. Anytime a head comes off my vehicles, it gets magna...
-
Well, they, like everything else you can buy are subject to failure. Not saying this is the case but.. I'd still opt for a temporary...
-
tekrsq replied to the thread Not wanting it to be a head gasket.Electrical, with the sensor placed in the crossover tube on the intake manifold.
-
The OP already has an aftermarket gauge as well as SCT X4
-
It was already suggested at the bottom of post #10
-
Do you have a tune in the engine? If so, also try going back to stock.
-
tekrsq replied to the thread Not wanting it to be a head gasket.It's been on the stock tune for several months. I only switch tunes if I'm going to be pulling anything heavy.
-
How are you tracking coolant temps, do you have an aftermarket gauge and sender? Are you getting any codes at all? Do you have an...
-
tekrsq replied to the thread Not wanting it to be a head gasket.I have an SCT X4 plugged into the OBDII port AND an aftermarket temp gauge on my A pillar. Both gauges read within 4 degrees of each...
-
tekrsq replied to the thread Not wanting it to be a head gasket.I've owned the truck for about 8 yrs, and it operated correctly.........until recently. No changes in driving habit, etc. I do a fair...
-
When was this new 4-core radiator put in ? Was this change in temp performance related ? It can be 4-core, but not flow very well and...
-
tekrsq replied to the thread Not wanting it to be a head gasket.My issue started before the change. I was concerned about flow, that's why I went with the new/ bigger radiator, and other replacement...
-
tekrsq replied to the thread Not wanting it to be a head gasket.That's what has me stumped and why I'm having a hard time believing its head related. In my recent quest to find the issue, the water...
-
-
Loading…
-
Loading…
Latest posts
-
Would love some folks thoughts on this, regarding oil changes on this engine.- Latest: Ellison Brown III
-
-
-
-
Staff online
-
Yupster DogSuper Moderator
Members online
- turtle019
- Rossue
- Yupster Dog
- f150dave2002
- Jeff Sweeney
- Ed Ortega
- expy2019
- householdboyer
- Ellison Brown III
- GixxerJasen
- keiferEXP
- sheilagram
- BMW2FORD
- Jstekk
- rd618
- Mr nBig
- Andy B
- 2020-MAX-Limited
- gyroman
- 07Tjherr
- kryichek
- Marauder
- Dennis_H
- Davadid
- Polo08816
- JimR_TN
- MHay
- aledet
- chuck571
- FoMoCo_Stealth
- Breadman
- Bonk
- Dvercher
- sulatek
- Scottorama
- LokiWolf
- hellohithere
- ncvacrep
- cobraco
- mpc11
- prenticect
- fothco
- Lynnii2
- Fastball48
- Password