Power Windows Fail

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

geno001

Active Member
Joined
Apr 12, 2008
Posts
43
Reaction score
8
Location
Lehigh Valley Pa
Hello All; 2004 Eddie Bauer Premium model. The most frustrating thing ever happened this weekend. 1 by 1 all of my power windows stopped working. They will go down but will not go up. I can't possibly be the first person this has ever happened to. Who can tell me what is wrong and what the fix is please??

Thanks in advance.
 

stamp11127

Full Access Members
Joined
Mar 10, 2012
Posts
6,218
Reaction score
1,250
Location
Temple, Georgia
I would suspect the drivers master control switch. You need a dmm in order to test it.
 
Last edited:

1955moose

Full Access Members
Joined
Nov 23, 2014
Posts
5,981
Reaction score
1,338
My 2000 did a single drivers side window, that went down, but only went up by running a ground wire straight from battery. Mine turned out to be the relay for the power window. Your fuses and relays are different than mine, but if you do have a relay for your windows, you might try tapping on it, and see if any difference. Unfortunately, I'm afraid Stamp is right though, you probably got moisture in there, and is causing your grief. As always, let us know what the fix is

Sent from my N9131 using Tapatalk
 

johnboneske

Full Access Members
Joined
Mar 30, 2010
Posts
759
Reaction score
169
Location
Ohio
You can get replacement controls off eBay. I think my master one for the drivers door was $35.
 
OP
OP
G

geno001

Active Member
Joined
Apr 12, 2008
Posts
43
Reaction score
8
Location
Lehigh Valley Pa
Problem solved......drivers master control switch. After I put the new one in I took the old one apart and one of the components on the circuit board was visibly smoked.

Thanks for all the suggestions
 

johnboneske

Full Access Members
Joined
Mar 30, 2010
Posts
759
Reaction score
169
Location
Ohio
Problem solved......drivers master control switch. After I put the new one in I took the old one apart and one of the components on the circuit board was visibly smoked.

Thanks for all the suggestions


thank you for replying back! Alot of people don't do that here, so you don't always know if you helped them or not!!??
 
Top