Search results

  1. rwmorrisonjr

    Rear strut installation question

    Same here. I pulled them both and remounted them correctly this afternoon. Much happier knowing it’s done properly.
  2. rwmorrisonjr

    Rear strut installation question

    Installed new Bilstein 4600s all around. Installed the fronts according to Bilstein's instructions, but installed the rears differently. Instead of installing the steel spacer (washer) on on the strut stem according to the instructions (#2 in picture below), I installed it like a washer under...
  3. rwmorrisonjr

    P0453 Code on my 2011 XLT Expedition.

    Try this: https://www.obd-codes.com/p0453 and this: https://obd2pros.com/dtc-codes/p0453/ Check all your wires since you replaced the fuel pump and canister. Could be the EVAP pressure sensor is going bad.
  4. rwmorrisonjr

    Schocks yet

    I'm on my second set of Bilstein 4600's and they work great. Stock shocks were done after 70k miles, first set of Bilsteins lasted ~150k miles. Just replaced them last week with 182k on the truck. Ride is much firmer and solid again.
  5. rwmorrisonjr

    Timing job questions

    Same plan I followed except I didn't drop the oil pan since nothing had broken apart when I did the tensioners and timing chains.
  6. rwmorrisonjr

    Timing job questions

    You're going to want to pull and replace them all since they are a major failure point on the 5.4 3V. I used the tool AND pulled the camshafts since one camshaft was scored. Both methods work, just need to be careful when reinstalling the followers since they can slip off their seats easily.
  7. rwmorrisonjr

    Bypass pipe driver's side gasket leak and replacement

    UPDATE: got the parts and coolant in Friday and replaced the gaskets Friday night. Took me about 2.5 hours. All because of this: If anyone needs to do this repair, here's a great video on how to remove the bypass pipe without removing the intake manifold...
  8. rwmorrisonjr

    Bypass pipe driver's side gasket leak and replacement

    More leak pics. Haven't started the engine since yesterday, the bypass pipe is leaking like crazy. Parts & Coolant will be here tomorrow, will hopefully get it fixed this weekend. Close up #1: Close up #2: Driver's side engine valley (fluid training along it, hard to see): Coolant puddle:
  9. rwmorrisonjr

    Bypass pipe driver's side gasket leak and replacement

    Gasket on the driver's side of the coolant bypass pipe has failed. It leaks coolant down the back side of the valley and down the bell housing, also down the front (how I finally found it). Been leaking all winter, just haven't had time to diagnose it or the desire to fix it until it got warmer...
  10. rwmorrisonjr

    Bypass pipe driver's side gasket leak and replacement

    After I changed my water pump, hoses, t-stat, and radiator cap in August, I noticed I was starting to lose coolant on a regular basis. Now that it's warm out, I finally got a chance to look under the hood and here's what I found. Guess the gasket began failing after all the work brought the...
  11. rwmorrisonjr

    Upgrading OEM Sync radio unit

    No. After 2010 the CAN BUS connections for the radio changed so the NAV unit would need to be from a 2010 or newer then programmed to the VIN in your Expy to be properly recognized. You'd also need to install the extra factory amp, additional wiring harness, SWC switch module, and wiring harness...
  12. rwmorrisonjr

    Satellite Radio Module

    Yes, you can upgrade to the OEM NAV unit but you'll need the additional amplifier, wiring harness, and backup-camera harness to bring the camera feed from the mirror to the head unit. This runs anywhere from $800-$1400 for 10+ year old technology and no upgrade options. For about half that, you...
  13. rwmorrisonjr

    Satellite Radio Module

    Year & model? After 2011, the modules are incorporated into the head unit.
  14. rwmorrisonjr

    Help ID coolant system part!

    Transmission cooler line. You'll need a new hose.
  15. rwmorrisonjr

    2014 - Limited Shock Options - Lower Control Arm Swap?

    What was your opinion of the KYBs and why did you switch back to the Bilsteins? I'm getting ready to replace my 4600s and thinking of going with KYBs.
  16. rwmorrisonjr

    Recommended wheel and suspension shop in Memphis

    Because I’ve taken it to several Firestone shops and they don’t do anything. They’ve also lost most of their good experienced techs.
  17. rwmorrisonjr

    KYB quick struts or individual with new mounts?

    Getting ready to replace my Bilstein 4600s with KYBs since the Bilsteins have 120k and are starting to make clunking noises. Weighing two options: KYB quick struts or buying the struts and mounts and reusing the factory springs. Quick struts would be easier but come to $712 on Rock Auto...
  18. rwmorrisonjr

    Metal bricks welded to the exhaust

    Flux capacitors to handle 1.21 gigawatts...
  19. rwmorrisonjr

    Recommended wheel and suspension shop in Memphis

    Does anyone have a recommendation for a wheel and suspension shop in Memphis, TN? I need to have at least a road-force balance done on my RF tire (massive speed vibrations 70-80 mph) as well as a complete suspension inspection if the balancing doesn't fix the vibration. Please don't recommend...
  20. rwmorrisonjr

    Vibration at 70-80MPH

    On our annual Thanksgiving road trip to FLL (~2k miles road trip). Getting a vibration at 70 mph and is most pronounced 75-80 mph. Vibration subsides when under load (acceleration, climbing) and when turning, gets worse when decelerating with cruise control (engine slowing) and when going...
  21. rwmorrisonjr

    SJB (Smart Junction Box) modification - separate turn signal bulbs

    What year is your Expedition?
  22. rwmorrisonjr

    What is this??

    Ford dealer installed remote starter. You should have a second fob for the starter on your keyring.
  23. rwmorrisonjr

    2015 Windshield top outer seal/gasket popping out

    It's part of the windshield and can only be replaced when replacing the windshield glass.
  24. rwmorrisonjr

    Recommended oil for 2014 5.4L 3V Triton

    Go with the oil weight you feel comfortable using. I switched to 5W-30 after I did the timing chains and roller followers at ~150k miles in 2021. Other than a slight decrease in mileage nothing else is different. I live in Memphis where it's significantly warmer than WA state most of the year...
  25. rwmorrisonjr

    Battery charge and recommendation

    Just tested it after the truck's gone to sleep, consistent .07-.09a draw. Placed phone on the charging head, jumped to .12a, dropped back down after phone was removed. Going to let it sit until Wednesday since I have another car to drive, will test it again then.

Latest posts

Members online

Total: 1,711 (members: 34, guests: 1,677)

Forum statistics

Threads
53,579
Posts
502,151
Members
47,148
Latest member
dvarney

Share this page

Top