Search results

  1. cmurphy2

    Helwig stabi.

    I would use OEM links. I tried Moog and started clicking in less than 5K miles.
  2. cmurphy2

    Plug hanging on Passenger Side?

    Found it. Goes into a receiver on side of battery box that is just a plastic hole. Must be same harness for all and if no CCD stores here.
  3. cmurphy2

    Plug hanging on Passenger Side?

    I was thinking that too, maybe the same harness for all and not used. Thanks.
  4. cmurphy2

    Plug hanging on Passenger Side?

    2018 Max Limited 4x4 HD Tow Anyone know what this is for? It’s on the passenger side behind bumper in front of right front wheel fender liner. Thanks!
  5. cmurphy2

    Clunk from front CCD shock.

    Been here. Agree start with sway bar end link. Only OEM too. I Learned that the hard way. If you open your drivers door and use it like a lever to bounce vehicle a bit you can likely reproduce clicking sound from the sway bar end link. Then I would move to shocks. On my 3rd set of OEM...
  6. cmurphy2

    Ford field service action number 21B10

    Hello, do you have a part number on the receipt for the front shock mount (s) you could post? Thanks.
  7. cmurphy2

    Michelin Premier LTX DT vs Defender LTX M/S

    Defender LXT M/S are great all around. If you search by vehicle on Michelin or Tire Rack the premier doesn’t show up likely due to size and load rating. I had the stock size Defender and now the 33in size with the 3/2 readylift. Sent from my iPhone using Tapatalk
  8. cmurphy2

    Carplay quits/reconnects

    Other f150 forums talk about cleaning phone charge port and updating phone software plus reinstalling Ford pass. I would start there or try a different phone. You can also update the sync software from vehicle.
  9. cmurphy2

    2018 expedition max coolant temp fluctuating ....

    That’s pretty hot for normal driving (+20 to 30 degrees) from my experience. Its also not normal for no numbers to show if you have the temp gauge number view selected vs the bar display. I have never seen numbers pop up on the display when I’m the bar gauge view. I would take it in for...
  10. cmurphy2

    Is there a way to fix this without replacing the whole part?

    A Body shop will give you a free estimate. Tape won’t last for long if it even works with amount of tension there. There is some plastic welding options to repair plastic bumpers without replacing that are not too expensive. Hard to tell from the photo if there is torn plastic clip/mounting...
  11. cmurphy2

    Michelin Latitude Tour HP 275/60R20

    I went with that size in a Defender LXT M/S and happy. I had this in the stock size and the 275/60 R20 after a lift. If you have power running boards and don’t lift or level it, you will likely rub with a 33 in diameter tire. I have a 3/2 readylift and a tune that included adjusting the...
  12. cmurphy2

    Speedometer calibration after lift/tires

    Bully Dog BDX tuner will allow you to set tire size over 33 in menu I saw in mine. Sent from my iPhone using Tapatalk
  13. cmurphy2

    SCT tuner

    I got a Bully Dog BDX Tuner to adjust for 33in tire size for speedometer primarily. It comes with a couple preloaded tunes. I installed the 93 octane tune to see. Pretty impressed. If I drive conservatively it gets stock or better gas mileage. The tuner has WiFi so you don’t need a computer...
  14. cmurphy2

    Ready lift, Tire and wheel size help?

    Readylift 3/2 with Michelin Defender LXT 275/60 R20 (33 in) factory rims. I wasn’t going for an off-road look, just plus size. 4x4 limited with heavy duty tow 3.73. RCI skid plates.
  15. cmurphy2

    Cold start rattle? (video)

    I did not have any codes for the phasers and don’t think they would throw any. I don’t think the phaser issue sounded like a tapping noise from what I heard. Will be curious about what you have going on. Sent from my iPhone using Tapatalk
  16. cmurphy2

    Cold start rattle? (video)

    Phaser job complete and fixed it. Sent from my iPhone using Tapatalk
  17. cmurphy2

    Cold start rattle? (video)

    My 2018 sounded exactly the same and is currently in the dealership having the cam phasers replaced. Will see if it resolves the sound. Sent from my iPhone using Tapatalk
  18. cmurphy2

    Rattle at start up??

    Hey, did you find any solution for the mirrors or cold start rattle? Thanks. Sent from my iPhone using Tapatalk
  19. cmurphy2

    Adding skid plates to 2018 Limited with tow package?

    They are 10 gauge steel powder coated. Sent from my iPhone using Tapatalk
  20. cmurphy2

    Adding skid plates to 2018 Limited with tow package?

    Sharing and aftermarket option. RCI Off-road F150 skid plates installed on a Expedition Max Limited 4X4 with Towing Package. Cost is $575 shipped with all hardware and I found a coupon for 5% off that. 3 holes had to be drilled in frame to get the rear diff plate to work(circled in photos)...
  21. cmurphy2

    Adding skid plates to 2018 Limited with tow package?

    I came across this option for aftermarket skid plates for F-150 however it looks like they could work for a 4th Gen Expedition too. They are PDM and sold by sharptruck.com. Not sure about 1/8 thickness though... Anyone see why these wouldn't fit a 2018 Expedition 4X4 Max Limited?
  22. cmurphy2

    Adding skid plates to 2018 Limited with tow package?

    Thank you! I think I see you ordered 6 of these with the trans raptor skid plate and will go with that. If I need more or less, not an issue. Sent from my iPhone using Tapatalk
  23. cmurphy2

    Adding skid plates to 2018 Limited with tow package?

    Hello, do the three bolts come with the access panel above? Sent from my iPhone using Tapatalk
  24. cmurphy2

    Adding skid plates to 2018 Limited with tow package?

    Sent from my iPhone using Tapatalk

Latest posts

Members online

Total: 1,426 (members: 21, guests: 1,405)

Forum statistics

Threads
53,568
Posts
502,073
Members
47,124
Latest member
pizzamankan

Share this page

Top