Search results

  1. S

    2004 Ford Expedition for sale

    Price lowered to $6500
  2. S

    2004 Ford Expedition for sale

    Yes, exactly. I believe the console is out of an ambulance chassis, resold after being taken out in lieu of a console built for lights/siren controls. Unfortunately, I don't have the tow mirrors anymore. They didn't work out very well, and were actually very poor quality. They vibrated so...
  3. S

    2004 Ford Expedition for sale

    Grille guard was made by Sterling Equipment out of Florida. They custom make them to your specifications, and I have been very happy with mine. And the center console is actually out of a Super Duty, since my truck didn't come with one when I bought it.
  4. S

    2004 Ford Expedition for sale

    2004 Ford Expedition - $6500 Call or text 269-547-8461 with questions, or use e-mail. I check my e-mail very regularly. No trades - Offers will be considered - 5.4L V8 - 130xxx miles (will increase slightly, as I will still be driving the truck) - Four wheel drive (4WD) - Automatic 4WD option...
  5. S

    Got my truck painted

    Yes, the push bumper is for the 2004 model year. I believe that any push bumper from 2003-2006 should fit though.
  6. S

    Got my truck painted

    Yes, the push bumper does move around a bit. Not enough to create an issue though. As for the black wheels, I have been thought about painting the original steel wheels black. I will have to reconsider it now. :)
  7. S

    Got my truck painted

    I can't quite remember what you mean by that. I drilled throught the top of the reverse housing straight down, and dropped the bulb down through the hole.
  8. S

    Got my truck painted

    For the reverse lights: At first, I welded some cheap driving lights to the hitch receiver. But I wasn't very happy with that route, and I drilled some holes in the reverse light housing. I put the halogen bulbs in the holes. It works pretty well.
  9. S

    Got my truck painted

    To start, I rewired the brake lights to all get power from the CHMSL circuit, so they no longer flash as turn signals. Then, I ran wires from the front, sending power directly to the turn signals in the back. That way, they only act as turn signals and not brake lights. I used the...
  10. S

    Got my truck painted

    Good luck!
  11. S

    Got my truck painted

    2. Around 20 minutes, give or take. 3. The mirrors I have now are the OEM mirrors that came on my truck.
  12. S

    Got my truck painted

    2. I cut until the base fit. 3. My mirrors now are heated, but do not have the turn signal.
  13. S

    Got my truck painted

    1. The cross bars were not on the truck when I bought it; I assume they were removed by the police department. 2. I used a dremel with the mini drum sander attachment to enlarge the holes on the taillights. 3. I have the OEM mirrors back on, although I painted the glamor cap gloss black to...
  14. S

    Instrument Cluster Swap

    I have a 2004 Expedition without the message center. It has the boring, plain instrument cluster, and I want to swap in a newer cluster out of a 2006. I have a few questions about that. If it has the message center (Which I am not sure that it does), will I still be able to see my...
  15. S

    My 3rd mod: Landing lights

    Yes, I have installed strobes into several different vehicles. Personally, I prefer to run the cables underneath the step plates inside the vehicle. I've run plenty of wiring in my Expy, and there should be enough space for several cables. I would not run the cables under the vehicle, because...
  16. S

    My 3rd mod: Landing lights

    Yes, I sell emergency lighting as well as install it onto vehicles for customers. I am a dealer for Tomar, Nova, and Whelen.
  17. S

    My 3rd mod: Landing lights

    I understand. The bigger brands cost a lot more than equivalent Speed Tech lights, especially Tomar. But, if you like them, thats what matters.
  18. S

    My 3rd mod: Landing lights

    Speed tech lights are nowhere near the quality as the more expensive lights such as Tomar, Whelen, Sound-Off, etc. I would never buy from them, especially because they knock off the designs of other lights.
  19. S

    How is wiring run front to back in an Expy?

    A lot of the wiring is run underneath the sill plates on either side of the vehicle.
  20. S

    '03-'06 Expy trim question

    The grille is the stock XLT one; I did not paint it. SSV means, as ELVATO said, Special Service Vehicle. It is basically a police package vehicle that is not pursuit-rated.
  21. S

    Got my truck painted

    The grille guard is a Smittybilt modular model.
  22. S

    '03-'06 Expy trim question

    I have a 2004 SSV (equivalent to an XLT), which had grey trim when I bought it. Since the truck was black and white, I had it repainted all black, including the trim. http://s251.photobucket.com/albums/gg288/EXPYSSV/2004%20Ford%20Expedition%20SSV/New%20Paint/?action=view&current=102_2552.jpg
  23. S

    List your Mods!!!

    The only mod is to enlarge the hole for the reverse bulb. The light itself will fit the truck with no problem.
  24. S

    List your Mods!!!

    I got aftermarket lights off of eBay. I have had pretty good luck with them so far. The beam pattern is good as well. eBay Link These are the same lights that I have, but I'm not sure what seller I bought them from.
  25. S

    List your Mods!!!

    Installed: -Painted all black, including lower trim -Smittybilt Pushbumper -Eddie Bauer wheels -Hella 500s on pushbumper -2008+ Superduty center console -Whelen PAH112 airhorn -07/08 Expedition Taillights -Amber turn signals in reverse light housing -Driving lights as replacement...

Latest posts

Members online

Total: 1,310 (members: 25, guests: 1,285)

Forum statistics

Threads
53,654
Posts
502,793
Members
47,269
Latest member
kapios

Share this page

Top