1999 XLT odometer and fuel gauge problems

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

FBOMB

Member
Joined
Jul 13, 2014
Posts
10
Reaction score
2
Location
Apopka,Fl
1999 XLT odometer flashes on and off intermittently and fuel gauge works intermittently...Are they both in the same wiring harness that connects to the cluster circuit board??? If you have to replace the cluster and have it flashed from ford will it store the correct mileage automatically as my odometer has almost doubled since the issue occurred???
 
B

bedrck46

First I would fix the odometer problem by fixing the cold solder joint There are some good videos on youtube on how to re-solder the bad connection

kindly provide more details about the fuel gauge problem

and yes they are in the same wiring harness that connects to the cluster
 
OP
OP
FBOMB

FBOMB

Member
Joined
Jul 13, 2014
Posts
10
Reaction score
2
Location
Apopka,Fl
The fuel gauge works whenever it wants too doesn't matter if it's hot or cold full or half full...Sometimes it flickers just a bit at whatever position it's at also...
 
B

bedrck46

there is a connector under the air intake tube you may want to check it and clean the contacts
 
B

bedrck46

see attached you are looking for C148 16 pin connector for fuel gauge C149 12 pin connector fuel pump circuit look on right side of print for location
 
Last edited by a moderator:
Top