5.4 started running rough, thanks to this forum, I fixed almost immediately

[Daves Not Here]

Just wanted to give a big THANK YOU to the members of this site. When my first generation 97 EB started running rough, seemingly out-of-the-blue, I read through some posts on this site first. A few of them mentioned a hose connection from the PCV valve that was located in an unusual spot at the very back of the motor. Sure enough that's what it was, the hose was cracked at the elbow. I would have never thought to look at this, because it is so hard to find , and such a strange type of set up for the PCV valve. If you're having a problem, look around on this site. I bet most problems have been experienced before, and probably solved from advice on this site. Thanks again.

 

[jeff kushner]

and BAM! another bad idle solved....happened on both of my 5.4's....


jeff

 

[RustyOval]

and BAM! another bad idle solved....happened on both of my 5.4's....


jeff[/QUOTE

I dont know about the idle issue, but dang I love your avitar!!