5.4L 4V swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

86caprirs

Full Access Members
Joined
Oct 19, 2010
Posts
139
Reaction score
3
Location
Chestermere, AB
Anyone ever swapped in a Navi 5.4L 4 cam into there Expedition?

I was looking at V-10 swaps but it looks like no one can do it running a Excursion PCM. So I am looking to swap in a Navigator engine and PCM but wanted to see if anyone has done the swap yet?
 

Expyguru

Full Access Members
Joined
Feb 21, 2012
Posts
130
Reaction score
26
Location
fultondale alabama
Whats the purpose of the build? Just to have a 4v motor or more power. I looked into every option that you could think of inculding a 7.3 diesel or 5.9 cummings. I stuck with the 2v with forged bottom and trickflow heads 44cc with 9.4 to 1 compression and 12lbs of boost.
 
OP
OP
86caprirs

86caprirs

Full Access Members
Joined
Oct 19, 2010
Posts
139
Reaction score
3
Location
Chestermere, AB
My engine has over 300,000 KM on it. Its leaking oil pretty good from the r/s rear of the head. Just looking at an option for a better engine selection. A Lightning engine would be a great choice but not practical.
 

Expyguru

Full Access Members
Joined
Feb 21, 2012
Posts
130
Reaction score
26
Location
fultondale alabama
I would just stick with a rebuilt 2v. I would fork out just a small amount more and get the lighting long block. It has better internals and then just add bolt ons and maybe a set of cams.
 
Top