I have only had my expedition for a short 5 months. The rear camera is mounted just above the license plate, dead center. I just purchased a Yakima bike carrier on the trailer hitch - directly in front of the back up camera. Now because of the wide angle lens I still can see behind me but the park assist sensors are constantly on. I know I can turn park assist off but I really prefer not to. Is there a way to make it perhaps a bit less sensitive? Any ideas welcome and thanks in advance.
A different back-up camera issue
- Thread starter Socomfort
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Flexpedition
Full Access Members
Park assist is not adjustable - its either off or on.
Yakima racks are the preferred equipment of opportunistic thieves looking to make a quick and easy buck. My only advice might be the most obvious - remove the rack when not in use.
Yakima racks are the preferred equipment of opportunistic thieves looking to make a quick and easy buck. My only advice might be the most obvious - remove the rack when not in use.
GAINMOB
Full Access Members
only thing to do is take the rack off until u actually use it
Similar threads
