NevadaGeo
Full Access Members
Thanks man for your help. I think I have it now, or at least I have studied this to death. Who's death we will find out.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Okay great, I forgot about the having to reverse the polarity. Sorry about that. It was easy I just reversed the factory connect that came from the housing and went to the ballast.Finally got it installed after some frustration. It was not plug and play for me as the connectors are laid out with the clips. I had to reverse polarity from the factory harness to the ballast. I figured it had to be something simple so I did not swear or raise my voice at all. I am good to go. I did cut out the rectangular taped section with a dremel tool and it makes it look somewhat neater.
Again Andy, thanks for your help.
Well I eat crow on this one... These LEDs DO NOT FIT either the base or the lens orifice. Mind you I will only eat crow served Jamaican style with Jerk seasoning! Sorry about that. Back to the drawing board on better back up lighting.
Ain't it the truth!! I have been shooting an invasive specie of Ring Neck Doves around my area for a year now. Great sport!One man's dove is another man's pidgeon
we have rock doves and ring necks here, they crack me up at the feeders, really timid towards other birds....but let a dove walk up and they get nasty with the new doveAin't it the truth!! I have been shooting an invasive specie of Ring Neck Doves around my area for a year now. Great sport!
That is what my setup looks like too. I ended up Gorilla taping all the loose external wiring to the housing so nothing moves when off roading.I made my modifications to my HID installation over the weekend. I ran all of my connections out the hole I made in the housing. I think it looks a lot better.
View attachment 19759
View attachment 19760