Body lift write up!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KWT2000

Full Access Members
Joined
Feb 4, 2010
Posts
2,378
Reaction score
43
Location
NINE MILE FALLS
the trans cooler and ps cooler don't have to come off... eitherway need to see some pics
 
OP
OP
Expeditionary

Expeditionary

Full Access Members
Joined
Feb 3, 2011
Posts
1,293
Reaction score
19
Location
Tampa, Florida
the trans cooler and ps cooler don't have to come off... eitherway need to see some pics

they dont come off, they just get unbolted then rebolted back up, I'm just following the kit directions, I have some pics in my album. I cant do a write up because my camera was effed up and all I had was my fone so all my pics aren't so great
 
OP
OP
Expeditionary

Expeditionary

Full Access Members
Joined
Feb 3, 2011
Posts
1,293
Reaction score
19
Location
Tampa, Florida
All The Way Done....

Except, you know that piece of 6" tubing that is supposed to slip over a line thats rubbing the gear box? Well I cut the line long ways like the kit says... but I cant find which line to put it over, is it steel, rubber, plastic, is it wires??? I have no idea. Also I have one ground stap put on with the extension but I cant find the other one that the other extension is for... and if i cant find it then I must not have unbolted it to begin with so either it's effed up or its fine

but THE THING IS A BEAST, horrible amount of work to get the BL on and the front bumper relocated so there isnt so much of a gap but still an Insane amount of work!
 
Top