Cant figure it out ?????

[White Expo]

Hello to everyone reading this..i have a 99 expo an itz around 130,000 miles but still runs great. Iam having an issue with it an itz probably the only one. I fixed the arms,ball joints, bearings,tie rods,new rotors,new tires...an for some reason i cannot make the noise go away...it sounds like tire rubbing when i turn right unto an intersection an push on the gas a little.does anyone know or ever experienced it before an how can it be fixed or what is it????like i said i pretty much checked everything no rubbing marks under truck or nothing..can anyone give me info

 

[Stoned06]

4x4 or 2wd? Just thinking out loud....It's possible the transfer case is going if it's a 4x4. Maybe if it has the Auto 4x4 switch something is wrong with the sensor and it's going into 4wd on tighter turns. Axle shafts/cv joints? Could be a variety of things associated with the drivetrain, and without hearing it in person may be difficult to assess. Good luck.

 

[King_]

I am having a similar problem with my 99 xlt awd.. When I turn it sounds exactly like a tire rubbing but they are OEM size, and I have check everywhere for wear...Nothing. I was worried it was possibly something in the drivetrain...any thing to check? or any good indicators?

 

[White Expo]

hell king i am still trying to figure it out too cant seem to find the solution

 

[dgray69]

Guys, check for broken shocks, or warn u joints, these will tend to sound like a tire rubbing

 

[JUST4FUN]

WHEN GOING AROUND A CORNER.AND IT SOUNDS LIKE A TIRERUB FOR JUST LIKE A SECOND OR TWO.ITS MOST LIKELY THE CLUTCH packs in the rearend change the gear oil
and add the friction modifier to it

 

[dgray69]

that to just, didnt think about that

 

[White Expo]

thanks dude i will let u know if any of those things work out it is becomming pain in my head i will take notes on everthing u people reply back

 

[White Expo]

hey i would also like to know if the u joint is worn can i tell by looking at them or they have to come off an also where is it located at for i can have a look also about the shocks being broken can u also look at them an tell

 

[King_]

Already tried replacing bearings and seals in rear end...still doing it Shocks are newer as well as new tie-rod ends...would the ball joints do this?