Code C1096

[2000fordchick]

Got another code that I need to get fixed. Can anyone help me out. ABS light came on and the pump under the hood will not turn off. Had to disconnect it so it would not burn out. Got the code C1096, any advice out there.

 

[Bedrck47]

did you get the code before you disconnected the pump because that code is for
"Hydraulic Pump Motor Open Circuit"

 

[2000fordchick]

No, I heard the noise and then disconnected it. It has been disconnected for about month now. When I fixed the EGR codes and fuel pump codes the system started showing this new code.

 

[Bedrck47]

have you check you fluid level If that is low it could cause the pump to run

 

[2000fordchick]

Yes, checked the fluid level, it is good.

 

[Bedrck47]

check the fluid level switch It should be open when full

 

[2000fordchick]

I'm not sure how to do that.

 

[Bedrck47]

disconnect the pressure switch and the plug in the pump and see if it still runs The pressure switch is normally open and only closes when low on fluid

 

[2000fordchick]

Okay well took a few minutes, my battery won't stay charged now. I disconnected the pressure switch and then plugged the pump back in. The pump still continues to run when the truck is on and off.

 

[Bedrck47]

OK Hopefully someone else will chime in with better advice