I am replacing all the Body / chassis insulator rubbers, due to the age and rust some bolts broke while unscrewing them, the question is.. any suggestions how to remove the broken bolts AND are there any access to the nuts from inside the car floor to spray some WD40, I did not use an impact tool to unscrew, just using a ratchet so the nut structure should be in place.
Expedition 2007 Body Insulator bolt/ nuts
- Thread starter Chris UAE
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I found information posted by Jim Brown, thank you very much for such a well described procedure, much appreciated
www.expeditionforum.com
Body Mount Bushing Instructions
Hey all - new here, but have found this place to be a great resource to an otherwise obscure chassis. I have a passion project I have been working on for the past year, which I will post in full when complete, but need some immediate help: I'm replacing all the body mount bushings with Energy...
www.expeditionforum.com
Ford2019
Member
From where did you get the Body Insulators? I'm in Saudi Arabia and need for my 2007 but not available with part stores...
Similar threads
