w2db
Member
I have a 2013 Limited with the multi zone HVAC. Clicking actuator, Need to see error to positively determine which it is. Sounds like the drivers side by gas pedal one but that seems impacted by temp settings.
I have forscan but don't see anywhere I can get codes from the HVAC
But also, my 2001 Mountaineer with auto temp control has a mode I can put it into to read error codes. Does mine have that and if so how to get it into this mode? I have the Ford DVD-rom for this, plus alldata and no info in there that gets me close to figuring out
Any pointers? I hope it is the one by the gas pedal and not the one right behind the console
GeorgeC
I have forscan but don't see anywhere I can get codes from the HVAC
But also, my 2001 Mountaineer with auto temp control has a mode I can put it into to read error codes. Does mine have that and if so how to get it into this mode? I have the Ford DVD-rom for this, plus alldata and no info in there that gets me close to figuring out
Any pointers? I hope it is the one by the gas pedal and not the one right behind the console
GeorgeC
