Front spacers on rear?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

LokiWolf

Staff member
Moderator
Joined
Apr 2, 2016
Posts
3,971
Reaction score
2,834
Location
Richmond VA
Anyone know if front spacers can be used on the rear? Or if the rear strut bolt pattern matches any other vehicle?

The 3 Inch spacers are too long for the rear. Rear geometry can’t handle much over a 2 Inch.


Sent from my iPhone using Tapatalk Pro
 
OP
OP
I

Icemanjones

Well-Known Member
Joined
Sep 4, 2019
Posts
65
Reaction score
20
Location
Orange County CA
Here is my thinking my 07 Expedition has 300,000 miles on it and I'm thinking I might need to replace the coils and the coil seat and insulator and now / corner it's over $200 and the bilstein's are going to cost more in labor charges than an assembled unit what do you think? Currently my wheel wells are 35 and 1/4 in and 35 in front and rear and I can't figure out if the coils are sagging or if that is where they're supposed to be. My non powered running boards appear to have a slight lowering from front to rear approximately 13 in vs 14 in
 

Black

Full Access Members
Joined
Mar 26, 2018
Posts
1,376
Reaction score
640
Location
Kentucky
Very possible they could be worn. Have you checked to make sure none are broken?
Not heard that happening much on the Expeditions but was quite common on the early 2000s Explorers.
 
OP
OP
I

Icemanjones

Well-Known Member
Joined
Sep 4, 2019
Posts
65
Reaction score
20
Location
Orange County CA
None of them look broken and they dont make any clunking or grinding noises but I figure when people say "the life of the vehicle" they may not be thinking of that high score. Im going to take it in sat and have them lift it up and check for any give or slop on the joints. Maybe they can tell how old or used everything is and give me their opinion. I love bilstein as I have them on my old lifted truck but that is a desert beast and this aint. Moog and acdelco seem to be the likely spring replacements as I read monroe is softer but hard to know.
 
Top