Help just bought suv without radio and it’s connectors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

brock2002

New Member
Joined
Jan 1, 2022
Posts
2
Reaction score
0
Location
South Carolina
Hey guys I just bought a 97 Ford expedition XLT and there are three radio connectors I’m trying to figure out what all the radio connections go to because the people before me cut them off and I’m trying to find the factory connectors online and I should also mention it has the premium speakers
 

Hamfisted

Full Access Members
Joined
Nov 20, 2012
Posts
2,893
Reaction score
1,795
Location
Ft Lauderdale
See if you see all of these wires in the bundle. Or the attached Gen1 radio wiring diagram.
You're saying someone cut the harness plugs off right ?


Constant 12V+White/Purple
Switched 12V+Black/Pink
GroundBlack/Green
IlluminationBlue/Black
Dimmern/a
Amplifier RemoteBlue
AntennaRight Front
Front Speakers6" x 8" Doors
Left Front (+)White/Red
Left Front (-)Brown
Right Front (+)Green
Right Front (-)White/Orange
Rear Speakers6" x 8" Rear Doors
Left Rear (+)Light Blue/Black
Left Rear (-)Yellow
Right Rear (+)Purple/White
Right Rear (-)Light Blue










.
 

Attachments

  • Gen1 Expedition Premium Radio With RICP.pdf
    54 KB · Views: 14
Last edited:

Trainmaster

Old School Member
Joined
Jun 17, 2017
Posts
3,618
Reaction score
2,122
Location
Rockaway Beach, NY
It you live in a Socialist state as I do where pic-a-part junk yards are no longer legal, look for a radio on ebay that comes with the plugs attached. Some yards just cut the wires off and include the plugs with the radios they sell. The 97 OEM radios are "plug and play".
 
Last edited:

Gregg Eshelman

Full Access Members
Joined
Jun 13, 2018
Posts
127
Reaction score
30
Location
Idaho
I hate when people cut the factory plugs off to direct wire (usually by twisting the wires together then wrapping with tape) an aftermarket radio. There are companies that make wiring pigtails with plugs to fit the factory plugs. Then you solder and shrink tube the pigtails from the new radio to those to make the adapter harness. That's so if you sell the car the factory radio goes back in and the factory plugs are still there.
 

Tocapet

Full Access Members
Joined
Jul 13, 2014
Posts
202
Reaction score
62
Location
Texas/Colorado
Hey guys I just bought a 97 Ford expedition XLT and there are three radio connectors I’m trying to figure out what all the radio connections go to because the people before me cut them off and I’m trying to find the factory connectors online and I should also mention it has the premium speakers
You can go to Crutchfield and buy replacement connectors with color-coded wires and a list of what goes where. Been there, done that.
 
Top