Plasti Dip?'s

[lve2wheel]

I see quite a few trucks on here with the Plasti Dip coating.

My question is can you or have you sprayed bed liner over top of Plasti Dip?
Or vise versa, sprayed Plasti Dip over bed liner?

Just curious.

How many of you have sprayed it? Does it spray on like car paint?

Thanks.

 

[Mikes05expy]

You CAN do either one but not sure why you would want to though. Plasti dip is meant to peel off so if you spray bedliner over it it's just gonna peel off eventually and be a waste of money. If you have bedliner sprayed on first you could plasti dip over it but again I'm not sure why you would want to.

 

[lve2wheel]

Well my truck is mainly meant for wheeling so I want to "rhino line" the bottom half of the doors and rear quarter panals. I can take the Plasti Dip right to that line but not sure how it would look, or hold up having that line kind of just stop where the "rhino liner" starts.

 

[Mikes05expy]

Ahhhhhhhhhh now I see, that makes more sense lol. It should hold up pretty good, there's a lot of members that have done their EB trim or the entire truck and had good results.

 

[lve2wheel]

I suppose I could do an inch or two or over lap, spray the Plasti dip, an inch or so down further than the "rhino liner" will go. And spray the rhino liner an inch or two above the Plasti Dip line.

Anybody ever spray Plasti Dip? how does it spray?

 

[lve2wheel]

Or any particular brands anybody recommends? one over another?

 

[MADEXP]

I just plasti dip some rims and it looks fantastic.

 

[GAINMOB]

ppl are doing entire vehicles now...matte...satin...gloss...they even have flakes and color changing...getting out of hand

 

[lve2wheel]

Im not looking to go to crazy just white or a matte gun metal grey. I want to stop it at the body line thou and start my rhino liner there. Just wondered if any one had any similar applications and if it peeled at all from a stop start line.

 

[GAINMOB]

i would stop at the line then continue with bedliner...should be fine...spray the liner first...no need to spray over the dip

 

[FordandPolaris]

All depends on the coats you put on. I have had it for about two years now and have re-sprayed the rims twice,but both times I didn't do enough coats (i think I did 3 the last time around). It is pretty durable stuff though, I was surprised it didn't melt away with the heat of the rotors.

It sprays just like spray paint as long as the weather is warm. If it is cold outside, it sprays in globby chunks.

 

[lve2wheel]

Thanks for the info! And yeah I plan on spraying the bedliner first up to the body line and than Plasti Dipping the rest.

 

[BIG GREEN FORD]

Thanks for the info! And yeah I plan on spraying the bedliner first up to the body line and than Plasti Dipping the rest.

Post pictures before and after

 

[lve2wheel]

will do its going to be a little bit before i get that far. Maybe mid September. want to get the lift, body lift, wheels and tires, and all trimming done before I rhino line and plasti dip

 

[ijustdid23]

i sprayec my entire truck, it will hold good.

 

[retrogarage6]

Dipped