hey come to think about it, I have a three inch body lift with a stearing arm extender. I would think my arm is at a higher angle then yours. Maybe look at air hose around shock or the electricial plug on sensor.
Raising an airbag sensor
- Thread starter reefkrazy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
AuctionExp
Active Member
ReefKrazy,
I got a new upper sensor bracket off Ebay (mine was bent) and it just got put in yesterday, and while the sensor no longer touches the steering column, it now looks like the lower bracket got moved or is out of position.
When you look at your front sensor, is the sensor completely vertical (similar to the rear sensor)? My front sensor looks like the bottom bracket is kicking out the sensor at a 45º angle so it is not completely straight (vertical) I'll see if I can take a picture tonight.
I got a new upper sensor bracket off Ebay (mine was bent) and it just got put in yesterday, and while the sensor no longer touches the steering column, it now looks like the lower bracket got moved or is out of position.
When you look at your front sensor, is the sensor completely vertical (similar to the rear sensor)? My front sensor looks like the bottom bracket is kicking out the sensor at a 45º angle so it is not completely straight (vertical) I'll see if I can take a picture tonight.
