This was the best way for me to raise up my suspension up a little for a more aggressive look. I've since then put on a 3" body lift but used this method to level the front end.
In the front driver side wheel well behind the wheel is a sensor. I took it off the ball joint and zip tied it above it giving it more lift.
The rear is located behind the back driver side wheel behind the frame. It should be next to the airbag. There is a ball joint also. It can move up and down if it's not rusted. mine was so I zip tied it on top of the joint. Pic here
Make sure not to go max height because you can destroy the airbag. Also higher up you go the less travel and thus a bouncy hard ride. Enjoy!
In the front driver side wheel well behind the wheel is a sensor. I took it off the ball joint and zip tied it above it giving it more lift.
The rear is located behind the back driver side wheel behind the frame. It should be next to the airbag. There is a ball joint also. It can move up and down if it's not rusted. mine was so I zip tied it on top of the joint. Pic here
Make sure not to go max height because you can destroy the airbag. Also higher up you go the less travel and thus a bouncy hard ride. Enjoy!