removing the door panels

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

shoota0075

Active Member
Joined
May 24, 2010
Posts
32
Reaction score
4
Location
louisville
anybody know how i remove the door panels on a 97 expo?, i want to replace the stock speakers with something a bit better and are the 5x7? thanks
 

walnuts4x4

Full Access Members
Joined
Jun 18, 2009
Posts
6,458
Reaction score
51
Location
Watertown, NY
if its similar to a 99...

FRONT- pull out little triangle piece on top of door and one screw behind that... pull out window switch and there is one screw behind that... around door handle pull out little plastic trim and remove door handle by removing one bolt on end of handle then remove lense on bottom of door and one last screw... so 3 screws and one bolt... then lift up on entire door panel to remove

BACK- two screws on the bottom of door and the bolt on door handle then lift and remove panel...

Yours might be a little different but start there and pull up firmly but gently and make sure all screws and bolts are removed... and when panel does come off twist out the bulb for the light too... hope it helps
 
Top