rob4092xx
Full Access Members
Is there anyway to turn off or disconnect the seatbell chime on a 2010 Expedition????
Seatbelt Chime!
- Thread starter rob4092xx
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
kickapebble
Well-Known Member
Yes, wear your seat belt
When you slide the male end into the female end, it allows a signal to be grounded. What you need to do is identify the signal wire and ground it. This requires you to take apart the female end and expose the wires, so it is best to have experiance with a multi meter and a general knowledge of how it DC voltage works. Another option is to just find a male piece at a junk yard, and insert it when you do not want it chiming.
When you slide the male end into the female end, it allows a signal to be grounded. What you need to do is identify the signal wire and ground it. This requires you to take apart the female end and expose the wires, so it is best to have experiance with a multi meter and a general knowledge of how it DC voltage works. Another option is to just find a male piece at a junk yard, and insert it when you do not want it chiming.
tmajikman
Full Access Members
Having a 99 FTMFW!
AK4wheeler
Member
There is a way to do it by accessing the main ignition menu. I do not know the correct steps, but I do know to get to it you need to cycle the ignition on-off 6-8 times. Once in there you have to have the menu printout to cycle through all the possibilities.
AK4wheeler
AK4wheeler
rob4092xx
Full Access Members
Thanks everyone!
