Tire Rubbing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

VexedEX

Full Access Members
Joined
Apr 7, 2012
Posts
378
Reaction score
9
Location
Virginia
What's the best way to prevent my new tires from rubbing when I turn hard?

Nitto Mud Grappler X~Terrain 33x14.50R16 *SUV is lifted about 2 inches*
 

FordandPolaris

Full Access Members
Joined
Feb 7, 2012
Posts
2,246
Reaction score
265
Location
Saint Cloud, MN
Where is it rubbing? My new tires rubbed on my valance below the front bumper, and I just trimmed that up using a hacksaw and some sand paper to smooth it out. However if it is rubbing on the frame, I think they make spacers for the lugs to allow them to fit.
 
OP
OP
VexedEX

VexedEX

Full Access Members
Joined
Apr 7, 2012
Posts
378
Reaction score
9
Location
Virginia
Where is it rubbing? My new tires rubbed on my valance below the front bumper, and I just trimmed that up using a hacksaw and some sand paper to smooth it out. However if it is rubbing on the frame, I think they make spacers for the lugs to allow them to fit.
Yes you are right previous owner did that but it still rubs.... I was thinking of just taking them off?
 

FordandPolaris

Full Access Members
Joined
Feb 7, 2012
Posts
2,246
Reaction score
265
Location
Saint Cloud, MN
I guess it all depends on what you do with the truck. If you never plan on going off road or you dont get snow or anything, then I would say downsize the tire a bit. We get a lot of snow here normally, except for this last year, and I have found that the slightly wider tire makes that much of a difference when going through snow and off road to find the snowmobile trails. According to an online tire size converter, my tires are 32.8x11.2 on a 16" rim, and that size is about as big as i could ever fit stock. Since you have 2" of lift, you could do a slightly taller and skinnier tire if you wanted, but like I said it all kind of depends on what you do with it.
 
Last edited:
OP
OP
VexedEX

VexedEX

Full Access Members
Joined
Apr 7, 2012
Posts
378
Reaction score
9
Location
Virginia
I guess it all depends on what you do with the truck. If you never plan on going off road or you dont get snow or anything, then I would say downsize the tire a bit. We get a lot of snow here normally, except for this last year, and I have found that the slightly wider tire makes that much of a difference when going through snow and off road to find the snowmobile trails. According to an online tire size converter, my tires are 32.8x11.2 on a 16" rim, and that size is about as big as i could ever fit stock. Since you have 2" of lift, you could do a slightly taller and skinnier tire if you wanted, but like I said it all kind of depends on what you do with it.
I live in Virginia so the weather is fairly unpredictable. It's a good tire to have and they look mean. I will just keep them on there and see what I can do about the rubbing.
 
Top