New member with new (to me) 1998 expedition. The blend door was bad, so, I cut the hole behind the glove box and got the old door out, with little pieces also. My problem now is that I can't get the new blend door to fit in. There doesn't seem to be enough room to get either the top or the bottom in without bending/breaking the new door. Is there a trick that I'm missing? Any help would be appreciated.
Trying to replace blend door
- Thread starter ir1shi
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
98EXPnSRQ
Full Access Members
I believe they make a blend door with a removable bottom tab so you can fit it in like you are trying to do. Here is a video. Look at position 7:35.
You can buy it here.
You can buy it here.
Last edited:
98EXPnSRQ
Full Access Members
Advance Auto Parts has them. Go to their web site and check your local stores to see if they have one in stock. A couple of stores in Sarasota have it in stock.
Thanks all, Amazon was the only place I found where you could buy only the Dorman 902-220 blend door, the local auto parts stores wanted to sell me a kit for 80.00, which included the Dorman 902-220. Amazon's price was 25.00, after shipping. Should be here tomorrow. Thanks for all your help,
Similar threads
