GAINMOB
Full Access Members
so the lows didnt come out good? 
i like the lows too...
i like the lows too... 
two 10" CVR kickers + Hifonics Amp
- Thread starter 12ramirezj
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
so the lows didnt come out good?
The lows from pro bass boxes aren't really satisfying for me. Pro bass boxes have a different sound to them. It sometimes takes a while to get used to. The designers focus less on producing accurate bass and focus more on making the output loud as possible around 40hz. If you really like deep bass, buy an 18", build a 10 foot cubic box that's tuned to 28-30Hz.
Last edited:
GAINMOB
Full Access Members
yeah thats not going to happen...i need my 3rd row
Trust me...it's worth it. I'm currently in the process of painting my box. I'll upload some pics tomorrow afternoon. If you ever need a ported box designed for you, hit me up. I can pretty much design anything you need at whatever tune you want.
Here are some boxes I've made in the past:
This is my current box:
I'm going to be building a new one soon probably. I've been wanting to try a sub up, port back box for a while now.
Here are some boxes I've made in the past:
This is my current box:
I'm going to be building a new one soon probably. I've been wanting to try a sub up, port back box for a while now.
GAINMOB
Full Access Members
ok...i need one now for my cvr 12's...vented to fit behind 3rd row...with it up...can you crunch and figure measurements/spacing on that for me?
let me know if you need numbers i can go on kicker.com and get them for you..i know min-max specs are 1.75-2.25 vented
let me know if you need numbers i can go on kicker.com and get them for you..i know min-max specs are 1.75-2.25 vented
OP
OP
12ramirezj
Active Member
I'm upgrading my system this weekend I'm gonna put in 2 Digital Design subs.. both are 12 in.. now I need to find a better amp because I heard digital design subs put out a lot of watts
I'm gonna put in 2 Digital Design subs.. both are 12 in.. now I need to find a better amp because I heard digital design subs put out a lot of wattsDo you have the measurements for how much space is available behind the 3rd row? I would go measure it myself but my truck is in the shop. I could easily do an angled box that's bigger at the bottom. Also...what frequency do you want to tune it to? I would recommend around...34hz for those subs. I used to have the same ones.
GAINMOB
Full Access Members
i'll get measurements today
starbuck478
Active Member
very nice system for $200 i used to have the 12" cvr's with a set of 12" JBL's still usin the same head unit too you should murder out that expy!!! check out my profile pics haha
Paint the inside of those headlights black like the limited headlights, take that ugly chrome brush guard off, and remove those running boards. Then get a new grill that's black and get 15% on your windshield. Then...respray your tail lights a little darker. THEN you can say it's murdered out. That would look 100x better than what your running and cost a total of about $200 for everything.
Last edited:
starbuck478
Active Member
I thought about goin all black but I like the chrome / stainless steel accents thats just me though and in PA its already illegal to tint beyond like 80% so I'm pushin it pretty hard with the 15% on my sides/back without hittin the windshield as well. I will admit I need to redo my tails since they've faded over time but I just bought a 2011 Ninja 650R recently so most of my cash is being dumped into that haha
Last edited:
