What did you do to the expy today
- Thread starter cleaningman94
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
GAINMOB
Full Access Members
shined it up GOOD!!! used Eagle 1 on the rims after i cleaned them during the wash...BLING BLING!!! that stuff is good...Eagle 1 for chrome
rburch
Full Access Members
Finally cleaned mine up! Was going to wax it for the winter but it looked like it was going to rain so i skipped it! Gotta get some updated pics tomorrow!
Big White
Full Access Members
Threw in a bazooka 10" sub that I have had for about 15 years. Not a hella lot of bass, but enough for me. Fill in the bottom a little bit.
Captain Morgan
Full Access Members
NADA
But I did buy a new 3tn hydraulic jack and 6tn jack stands.
I was about to buy a torque wrench and someone over-heard me talkin to by buddy, he said he was a Ford mechanic for 18 years and said I just needed to hand tighten the plugs till the compression rings stopped collapsing. I said that's what I've done in the past and good enough then. He also said I should go ahead and buy a new thread set for the plugs on that head cuz I would need them
I also asked about the injectors and he said stick with OEM or have them flushed.
On a lighter note, I bought an ASUS TF300T 10" tablet this weekend for the navigation \ media pc \ ODB2 project and ooowe la la, this things is SCREAMIN fast!
OH and I found some hella snow chains for about $150 pr delivered, so I need to place that order.
.
But I did buy a new 3tn hydraulic jack and 6tn jack stands.
I was about to buy a torque wrench and someone over-heard me talkin to by buddy, he said he was a Ford mechanic for 18 years and said I just needed to hand tighten the plugs till the compression rings stopped collapsing. I said that's what I've done in the past and good enough then. He also said I should go ahead and buy a new thread set for the plugs on that head cuz I would need them
I also asked about the injectors and he said stick with OEM or have them flushed.
On a lighter note, I bought an ASUS TF300T 10" tablet this weekend for the navigation \ media pc \ ODB2 project and ooowe la la, this things is SCREAMIN fast!
OH and I found some hella snow chains for about $150 pr delivered, so I need to place that order.
.
BigBoy99
Member
Started planning my tablet head unit conversion. I rooted the nook last night, and am working on plans and amps and speakers
Captain Morgan
Full Access Members
I used a dremel to clean the spades on the #1 injector that was dark brown and looked like no contact was possible, seems to have stopped the P301 code for now. I'll know more when I drive it later.
I also discovered that the CAI body had slipped away from the adapter ring again and I had to re seat that and tighten the clamps.
I sprayed cleaner in the MAS area and the throttle plate. I also cleaned the K&N air filter.
.
I also discovered that the CAI body had slipped away from the adapter ring again and I had to re seat that and tighten the clamps.
I sprayed cleaner in the MAS area and the throttle plate. I also cleaned the K&N air filter.
.
Canadian Expy
Full Access Members
Bought two new Red Tops and a dual battery kit this along with the powermaster alt and enlarging the big 3 should keep the electrical stuff happy.
Captain Morgan
Full Access Members
SWEET
Please document the heck out of this and share the schematic and parts list with us.
Please document the heck out of this and share the schematic and parts list with us.
Canadian Expy
Full Access Members
Will do I, wouldn't get it for another week or so it's coming from Cali.
GTR-34
Full Access Members
I drove in the mud
Sent from my Apfelphone
Sent from my Apfelphone
Captain Morgan
Full Access Members
Changed the plugs and COPs
.
.
GAINMOB
Full Access Members
i did this today...lol
Captain Morgan
Full Access Members
You built some trophies?
JK
Congrats!
.
JKCongrats!
.
Canadian Expy
Full Access Members
I replaced upper control arm + ball joint, then put in dual batteries and new alt.
Then fuse block and wired everything up.
Ohh also LED lights in the interior
Then fuse block and wired everything up.
Ohh also LED lights in the interior
FireRed5.4
Member
Changed the #3 COP... Was having an intermittent engine miss and loss of power after overnight rain (AGAIN) hooked up the ODB and #3 was the culprit. When I pulled it there was moisture around the top of the boot, I must be parking on just the right angle for the rain water to drip in the plug hole. The Heater control Valve is also located just above it.
alaskanexpy
Full Access Members
had somebody highbeam be this morning after making a lane change with plenty of room. which pissed me off, so i delt with any future idiots that may do the same.
they are pretty damn bright!
they are pretty damn bright!
Big White
Full Access Members
had somebody highbeam be this morning after making a lane change with plenty of room. which pissed me off, so i delt with any future idiots that may do the same.
they are pretty damn bright!
I hope you are kidding.
You could seriously cause someone to wipe out doing that. And even that not happening, everyone has a cell phone. I would certainly call 911 and follow until LEO shows up.
Similar threads
