Search results

  1. IvDogg

    Turn Signal Not Working

    Hey all, long story short, I think the problem was a mix of a broken combo switch a failing relay and some bad bulbs. It's working now, but in the process I changed the combo switch originally because it physically broke. Somewhere after that some bulbs caused the intermittent issue, replaced...
  2. IvDogg

    Turn Signal Not Working

    Very experienced with those tools (former Army radio repairman). Some additional notes: I saw a post on F150 forum from someone swearing it's the bulbs; one bad bulb will spoil the whole bunch. So I changed all my bulbs and the turn signals worked again. I thought all was well. A few weeks...
  3. IvDogg

    Turn Signal Not Working

    Tried a new relay anyway, no change... So I try both left or right and it will blink once or twice then stop. The arm will physically toggle back to center after turning as should, just doesn't blink more than twice. Thanks again all.
  4. IvDogg

    Turn Signal Not Working

    Hey everyone, I have an 05 EB, here's my turn signal story: - Sometime ago turn signal switch physically started coming loose to where it was just dangling, so I replaced it. - Bought some cheap replacement from carparts.com (yes bad idea in retrospect), it was working fine for a few months. -...
  5. IvDogg

    2004 EB Expedition Turn Signal Switch Issue

    So out of curiosity, anyone know what would happen if you left the spring out? I think I lost mine while working on it.
  6. IvDogg

    P0011, P0354, P0302 - Help

    Alright, update for all, after changing the spark plugs, ignition coils, vct solenoids, and cam position sensors I finally found the problem: Needed to replace the bank 1 ignition wire harness (the wire harness that powers the ignition coils and injectors for bank one). Pep boys lists it as...
  7. IvDogg

    P0011, P0354, P0302 - Help

    Thank you all for the replies! I changed the bank 1 VCT solenoid because it was pretty easy and instantly got better performance. Still have a bit of a misfire and fuel economy isn't that much better. Will be giving it a tune up today: Oil change, air filter, plugs and just the coil for the...
  8. IvDogg

    P0011, P0354, P0302 - Help

    So are you saying it's that bad? You don't think changing these few parts has a chance to resolve it?
  9. IvDogg

    P0011, P0354, P0302 - Help

    Thank you! I should have clarified, I looked up the trouble codes, but I'd love to hear some recommendations. I'm 'hoping' a tune up to includes, plugs, coils and the VCT Solenoid should get it running smoothly. Thoughts?
  10. IvDogg

    P0011, P0354, P0302 - Help

    Hey All, been a while since I've been on here. Picked up my second Expedition, third Ford SUV (owned an explorer before too). 2005 Eddie Bauer - 187k. I know, high mileage, but got it for cheap and it's in great shape and all the EB comforts work and look good. Service Records for this truck...
  11. IvDogg

    '--------' (Dashes) in odometer, won't start

    I'm thinking about buying one of those VCM modules... If I just put in the new instrument cluster then the instructions in the video a try Ford pats key programming using vcm and ids software 2005 f150 - YouTube should that work?
  12. IvDogg

    '--------' (Dashes) in odometer, won't start

    Solder wick sounds like a good idea... I'll post a pic... Probably will be a few days before I can work on it, maybe not till the weekend.
  13. IvDogg

    '--------' (Dashes) in odometer, won't start

    If I'm replacing just the instrument cluster everything needs to be re-programmed? I figured it was just a matter of matching the keys to the PATS and setting the odometer, is it more than that?
  14. IvDogg

    Hello From Aiea, Hawaii with a 99 XLT

    Hey fellow Hawaii board members, I need help finding a good auto electric mechanic for my XLT, or a good contact for someone at the dealership service department.... I messed up my instrument cluster trying to fix the http://www.expeditionforum.com/f27/flickering-odometer-16847/ problem...
  15. IvDogg

    Front Drive Shaft Installation

    Just updating, so I installed the drive shaft, 4 HI and Low work great, but... When running in AWD on sharp turns I get that rough skidding feel as if it were in 4x4 HI or Low... I read on another post somewhere that the wheel speed sensors may be faulty; since it can't detect the wheel...
  16. IvDogg

    '--------' (Dashes) in odometer, won't start

    Hello all, I broke my '99 XLT trying to fix the http://www.expeditionforum.com/f27/flickering-odometer-16847/ .... I'd add some solder on the contacts, then it would work fine for a couple weeks... After the third time trying to fix it I must have messed up the circuit board somehow...
  17. IvDogg

    Front Drive Shaft Installation

    I just ordered the bolts from a local Ford Dealership. For everyone's reference, part# N800594-S100 $3.32/ea.
  18. IvDogg

    Front Drive Shaft Installation

    So I finally got under there the other day to verify the front drive shaft install... Anyone know where I can buy bolts to get the drive shaft back on? The drive-shaft is already bolted to the u joints on both ends, looking for the u joint to trans-axle and u joint to front diff. Thanks.
  19. IvDogg

    Front Drive Shaft Installation

    Mindgame, You got a ballpark amount for how much this should cost?
  20. IvDogg

    Correct Idler Arm Size

    Ok, measured it, mines is 3.43" (the one that's out of stock)... But damn, I just checked, 1aauto wants to add $110 for shipping... Looks like I'll be trying to find this stuff locally or another site.
  21. IvDogg

    Fuel Gauge Not Working

    So I finally got around to this (sort of)... Checked the C148 connector under the hood, had to remove the air filter housing to get to it. Looked pretty dirty had to clean it off with some electrical parts cleaner to even be able to tell the different color wires apart. I used my radio...
  22. IvDogg

    Correct Idler Arm Size

    Ahhh, that make sense, thank you.
  23. IvDogg

    Correct Idler Arm Size

    I'm under the impression that it's the same length, but different size bolt pattern? Is that correct?
  24. IvDogg

    Correct Idler Arm Size

    Hello All, I have a 99' XLT 4x4 with some squeaky ball joints... So upon shopping around, I'm going to buy the front suspension kit from 1aauto.com (1997-2002 Ford Expedition 4WD Front Suspension Kit (with 3.43" Bolt Pattern Idler Arm) at 1AAuto.com or 1997-2002 Ford Expedition 4WD Front...
  25. IvDogg

    Front Drive Shaft Installation

    Hi all, thanks for the feedback, I'll let you know how it goes, I spent this past weekend changing the oil pickup tube on my A4 (PITA!!! Had to hoist the engine and drop the sub frame in order to drop the oil pan!)... Anyways, I have the original drive shaft (came with the car), and it looks...

Latest posts

Members online

Total: 1,410 (members: 23, guests: 1,387)

Forum statistics

Threads
53,584
Posts
502,195
Members
47,161
Latest member
M Bennett

Share this page

Top