stamp11127
Full Access Members
That proves that there isn't an issue with the circuit as far as being overloaded. Try the same test but don't step on the gas this time and see if it will slowly back out.
If it does back out then it is a short to ground. Time to grad a flashlight and climb underneath. Expect to get dirty/greasy.
Search for thread: "Wrench icon 2007" in the 3rd Gen section. He was having a harness related problem. There is a pic of the problem harness at rely 33 or 36 I think, that would give you an idea of what it may look like. His was on part of the exhaust system and was obvious once someone looked at it.
If it does back out then it is a short to ground. Time to grad a flashlight and climb underneath. Expect to get dirty/greasy.
Search for thread: "Wrench icon 2007" in the 3rd Gen section. He was having a harness related problem. There is a pic of the problem harness at rely 33 or 36 I think, that would give you an idea of what it may look like. His was on part of the exhaust system and was obvious once someone looked at it.
Last edited: