rodrickglover
New Member
I have a 03 Eddie Bauer expedition. My cruise control recently stopped working. The indicator light on the will come like its working fine , but when I set the cruise it will not engage but the light is still on. Please help
cruise control not working. please help.
- Thread starter rodrickglover
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
B
bedrck46
check the following fuses with a meter. #5, 12 and 28
Visual Inspection Chart Mechanical Electrical
Speed control cable
Throttle lever
Speed control actuator
Brake pedal position (BPP) switch
Speed control deactivator switch
Bent brake pedal deactivator switch tab
Power control module (PCM)
Central junction box (CJB) fuse(s):
5 (7.5A)
12 (10A)
28 (5A)
Circuitry
Visual Inspection Chart Mechanical Electrical
Speed control cable
Throttle lever
Speed control actuator
Brake pedal position (BPP) switch
Speed control deactivator switch
Bent brake pedal deactivator switch tab
Power control module (PCM)
Central junction box (CJB) fuse(s):
5 (7.5A)
12 (10A)
28 (5A)
Circuitry
Last edited by a moderator:
splintrcel
Full Access Members
There also is the sensor on the master cylinder but if your light stays on its probably not that sensor but its super cheap to replace.
B
bedrck46
FYI there is no sensor on the master cylinder on the 2ND gens for the speed control
On the first gens that sensor is also referred to as the deactivation switch on the second gens the deactivation switch is located inside at the brake pedal also on the brake pedal is the Brake Position Switch
On the first gens that sensor is also referred to as the deactivation switch on the second gens the deactivation switch is located inside at the brake pedal also on the brake pedal is the Brake Position Switch
Last edited by a moderator:
rodrickglover
New Member
At splintercell. What were your cruise control issues..
Just fixed this on my 03', its the cruise control release switch ($6.75) on the brake pedal RockAuto Parts Catalog
rodrickglover
New Member
Did your truck have the same symptoms as mine??
GAINMOB
Full Access Members
what about the GEM?
rodrickglover
New Member
What's the GEM?? LOL
B
bedrck46
the GEM module was only in the 1st Gen expy's
splintrcel
Full Access Members
I always forget where the 1st and 2 gen border is. It does just seem like a cheap sensor though. The computers are rarely a problem.
B
bedrck46
02 was the last of the 1st gen's 1997 to 2002
06 was the last of the 2nd gens 2003 to 2006
06 was the last of the 2nd gens 2003 to 2006
