Gruz7
Full Access Members
At the vet today.
Oh my lanta [emoji7][emoji7]
Sent from my iPhone using Tapatalk
Show your Lifted 3rd Gens
- Thread starter 13crushrubi
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Oh my lanta [emoji7][emoji7]
Sent from my iPhone using Tapatalk
JZHOUSE
Active Member
Yes I am. You can keep the running boards on but you should trim a little of the plastic in the rear with a Dremel or Proxxon tool. Very easy to do. Other than that you should be fine.
JZHOUSE
Active Member
Looks great!
Gruz7
Full Access Members
Sounds like some Wheels Spacers would've solved your problem. Looks sick nonetheless
Sent from my iPhone using Tapatalk
Gruz7
Full Access Members
Mark Buckner
Well-Known Member
I just installed the 3/2 ReadyLift Kit and am trying to figure out the wheel/tire question. If you don't mind, what size are your wheels, and what tires are you using. The combination looks great! Thanks
Factory 20's. Factory offset. Had Toyo Open Country ATII'S 35/12.5Or20. Rubbed upper control arm at full lock. Thought I could deal with it until I started backing up my boat. Thought about putting some 1.5" spacers but then they would have rubbed my power running boards. Sold em on Craigslist. At dealer as we speak having some Toyo ATII'S 33/12.50r20 (305/55r20) installed. It says that they are 12.50 wide but its more like 12.4 wide. With the decreased overall tire diameter of -2", -1" sidewall height, I should be able to put some spacers on now, if they still rub. Or aftermarket wheels with a different offset. I'll reply back in a few with an update and pics.
What size are those factory 20s? I have factory FX4 wheels on mine wondering if they are the same width
JakeEL
Member
About ready to pull the trigger on a 3/2 spacer lift. Plan is to run 35/12.5s with probably 1/2" less back spacing on the wheels kicking the tires out 1/2" more on all 4 corners. Don't want them to stick out too far but I figure ill help with the rub. Are you guys changing the stock back spacing on the wheels? Also does a 35" tire fit under the back where the spare is?
Similar threads
