S20Workstation4
Latest activity Postings About
-
-
I'm not sure how the fluid damaged the connector, it is not conductive, I agree with S20, they should have fixed that with the lead... -
If you had radio controls in the rear of the center console the problem could be there. The rear speakers run through there. You'll...
-
S20Workstation4 replied to the thread No sound from rear speakers?.It could be the aftermarket stereo that is doing it. Does the aftermarket stereo have the factory option of balancing where the sounds...
-
S20Workstation4 replied to the thread Headlamp wiring issues for 2013 Ford Expedition Limited.This is the wiring diagram for the 2013 Headlamps. Try testing for excess resistance on the circuit, or see if you have an open...
-
-
S20Workstation4 replied to the thread Transmission Leak.The 6R80's are well known for leaking fluid at the sleeve. It happens to almost every 6R80 transmission. When they replaced the lead...
-
S20Workstation4 replied to the thread Mechanics haven't helped... can you.If it is a fuel issue.....easiest way to test is to read the rail pressure w/ a gauge. See what it is at idle, and if it can be...
-
For a 2013, I seriously doubt that the aftermarket assemblies would come with LED Bulbs, if any bulbs at all....most of the ones I have...
-
S20Workstation4 replied to the thread No high beams.I'd say put halogen bulbs back in there for now, and see if that fixes the issue. Use Halogen bulbs for the diagnosis process as well.
-
S20Workstation4 replied to the thread No high beams.I would say it is unlikely, but you could try replacing the bulbs. Did he install LED Aftermarket lights instead of Halogen?
-
S20Workstation4 replied to the thread Radiator and fan failure - what else to replace?.I would do the radiator hoses with the new radiator.....make sure no A/C Lines to the condenser got damaged in the fan blade war...
-
S20Workstation4 replied to the thread No high beams.With the fuse being good, I assume that the High Beam Lamp turns on in the Instrument Cluster, right? Does your flash-to-pass feature...
-
S20Workstation4 reacted to KOMaynard's post in the thread '18 Expedition Brake Torque Spec Confirmation with
Like.
Looking at the actual listings for parts, although the procedure calls for removal of the bracket. It looks like it isn't necessary to... -
S20Workstation4 reacted to KOMaynard's post in the thread '18 Expedition Brake Torque Spec Confirmation with Like.
Yeah, that was my exact thought as well. 258 is a whole lot of force, and well above anything I've ever run into before. I was almost...
-
S20Workstation4 replied to the thread '18 Expedition Brake Torque Spec Confirmation.Yes, those specs are correct. The Rear Bracket seems abnormally high, but I checked with the workshop manual it is indeed 258 Ft-lbs...
-
-
Loading…
-
Loading…
