Recent content by bowman1268

  1. B

    Front end annoying clunking noise

    Sorry I thought I posted a update.Mine ended up being a bolt that was not torqued down properly when I had my upper control arms replaced.It took a few months for the bolt to work loose a bit and cause the intermittent noise.
  2. B

    Fed up with front end work still has clunk

    Yhea I am not giving up on this yet.I ordered a drivers cv joint and new universal joints as the next set of parts to replace.Reason for the cv is while under it yesterday I grabbed the halfshaft and noticed the new passenger side one moves in and out freely while the factory one on the drivers...
  3. B

    Fed up with front end work still has clunk

    Funny you guys say front u joints.I was just thinking that is one of the only things I have not checked.Today it would creak/clunk only when accelerating from a stop while going straight sometimes while making a slight turn but only if moving.I got pissed so at about 20 mph I yanked the wheel...
  4. B

    Fed up with front end work still has clunk

    Just a update Still have the noises but can't nail down the sound replaced sway bar bushings and links again replaced upper and lower control arms with ball joints new shocks new pitman arm and idler arm and all the tie rods joints. I am flummoxed any ideas what might cause this are very...
  5. B

    Front end annoying clunking noise

    mkc I feel ya Mine is doing the same thing only things left I havn't replaced are torsion bars.I hate the fact that I will be driving around and it is riding perfect and quite.I get my hopes up that it is fixed then bam I hit a bump or turn just right and clunk then may not do it again or may...
  6. B

    Fed up with front end work still has clunk

    It is 4wd I just got back from the 5th test run today after retightening every bolt in sight.It is still doing it. Ps cv joints were already replaced
  7. B

    Fed up with front end work still has clunk

    I am at my wits end to the point of trading my expy in.I just replaced upper and lower ball joints,inner and outer tie rod ends,the steering box,pitman arm,idler arm,shocks,and sway bar end links.I still have a intermittent clunk when turning at speed like with on ramps and right hand turns.If I...
  8. B

    overhead console illumination wire

    Thanks so much this will be a huge help figuring out what is going on.
  9. B

    overhead console illumination wire

    Thanks for the heads up. I ordered a ford factory paper manual but I really need to figure this out so I can get all the wires and junk hanging from my ceiling put back up for a road trip saturday.
  10. B

    overhead console illumination wire

    Hi guys I am tracing a electrical problem with my overhead console and for the life of me can't find a wiring diagram.Does anyone happen to know the colors of the wire that power up the lights in the hvac control when the headlights are on? Its a 99 model
  11. B

    what price did you pay for your expy?

    1999 xlt $800 from a repo auction. Had a new ford certified motor in it that the install wasn't quit finished on and was very slap dash. Everyone thought it had blown out a plug ,but I got it home threaded a new plug in and it has been great ever since.I have had it a year and love it.Although...
  12. B

    Fixing a hose mess left by the previous owner

    Well the weather was bearable today so I decide to fix some more of the stuff the previous owned bodged together in a really crap way.I am trying to rebuild the hoses to the from and rear heater cores were they had been disconnected from a bad front core.My problem is it is a mess of 3 different...
  13. B

    4wd/awd switch what wire is illumination

    Thanks guys. I got wires sorted now I am trying to hunt down a green led that matches the factory green off the shelf green is not even close.
  14. B

    4wd/awd switch what wire is illumination

    Hi does anybody happen to know which wire going to the awd/4wd switch on a 99 expedition is the ground and which is the power to the illumination?Or happen to have the wiring diagram.I am replacing the rice bulb that is blown with a green led but I want to wire it in instead of using the factor...
  15. B

    Deciding how may 6" off road lights to install

    I was just looking at the led bars on ebay but not sure I would like the look.That and the local cops would have a field day saying it looks like there light bar.
See more

Latest posts

Members online

Total: 1,419 (members: 19, guests: 1,400)

Forum statistics

Threads
53,696
Posts
503,108
Members
47,344
Latest member
jmdunham2

Share this page

Top