Search results

  1. NC-Expy

    Dana 44 Swap

    Nevermind, after reading up about this it seems like way more work than I need to be doing, especially for just a street crawler. Sorry for the waste-of-a-thread
  2. NC-Expy

    Dana 44 Swap

    How much work/cost would it be to do a straight axle swap front/rear on an Expo? I'm tired of switching out ball joints/CV axles every other month it seems... and figure if I throw a Dana up front, I might as well do the back too. How much work do you guys think this would be and how much...
  3. NC-Expy

    IAT Sensor temperature?

    After unplugging the IAT sensor and the battery over night, this morning everything checks out OK and the sensor is reading close to 76 degrees during the day. Seems like everything is back to normal, thanks guys.
  4. NC-Expy

    Replacing Glove Box Light Bulb

    Ha good luck with that, I have no clue how to do it and I ended up breaking the glove box light housing when I tried changing mine out. When I ordered a used housing online it had an existing halogen bulb in it and I simply used a set of needle nose pliers and very gently pried out the bulb and...
  5. NC-Expy

    IAT Sensor temperature?

    It's 100 degrees constant, doesn't change.
  6. NC-Expy

    IAT Sensor temperature?

    What should the temperature of the IAT sensor be that goes into the intake? Mine is reading at 100 degrees Fahrenheit and I have read that it should be exact or close to your coolant temperature... My coolant reads at 190 degrees Fahrenheit and that's a good ways off from the IAT temp...
  7. NC-Expy

    Apple TV?

    I'm guessing you are using a mobile hotspot? If so, it acts as a router, so you shouldn't have any issues. But obviously it would have to be tested in order to be verified. Good luck, let us know what happens!
  8. NC-Expy

    Appearance Question

    Do you guys think my truck will look stupid if I go ahead and do the body lift but stick with my 35" tires for now... I don't have money for 37's at the time and I really want to go ahead and lift it higher. 37's for an 18" rim are not cheap! I've got 325/65/18 tires on it (34.6/12.8/18)...
  9. NC-Expy

    Apple TV?

    That's actually a really good idea. You'd have to buy several adapters though seeing as how I think the Apple TV is only HDMI and optical cable.
  10. NC-Expy

    Carbon fiber interior

    What did you use?
  11. NC-Expy

    Good idea or bad idea? LED light bars

    yeah they are cool lookin' at night, and light up brighter when you put your turn signal on. Just don't know how stable they'd be without being able to rest against the running boards, seeing as how I don't have them on.
  12. NC-Expy

    Good idea or bad idea? LED light bars

    RECON 62" BIG RIG LED RUNNING LIGHTS BARS LINE OF FIRE | eBay
  13. NC-Expy

    Expedition Forum Decals

    What are all these supporting member things under our avatars? how come i don't have one?
  14. NC-Expy

    Aftermarket Mirrors

    Really? Even 3rd gen mirrors are direct fit? I noticed that some 97-03 mirrors have a smaller base than the Expeditions do.
  15. NC-Expy

    Will these help with my rear end squeaking?

    Energy Suspension Bushing Rear Sway Bar Set Ford Expedition Navigator 22mm Red 703639336013 | eBay Do consider, I have brand new coil springs, brand new shocks, brand new sway bar linkings, brand new control arms, brand new ball joints, brand new innter/outer tie rods, etc... So pretty much...
  16. NC-Expy

    Just Ordered :)

    Just ordered another Edge CS Programmer as well as the Pod.... I had one of these before and had to sell it due to financial trouble, now thought I'd bite the bullet and buy it again... $373.15 free shipping... they are on sale! Can't wait!
  17. NC-Expy

    Aftermarket Mirrors

    I really want some... can someone PLEASE find some damn aftermarket mirrors for 1st gen's... :( I feel like it would complete my truck so much... I'm very skeptical about trying the 2nd gen mirrors on my truck, it would look great though. I have power, heat, and turn signal... So don't...
  18. NC-Expy

    Wow, did I ever F' up

    Buy NUKIE! Perfect opportunity!
  19. NC-Expy

    interior lighting: 15" LEDglow kit

    Looks good, I've got green LED's on my interior too... I've never really posted up a lot of pictures of my interior... I'll have to put that on my TO-DO list!
  20. NC-Expy

    3 Inch Performance Accessories Body Lift

    Are the instructions included with this lift kit very self explanatory and easy to follow? I want to order the lift, but do NOT plan on paying someone $600-$700 to install this for me. I'd like to do it myself. Without easy access to air tools and a very tight schedule, do you guys think I'd be...
  21. NC-Expy

    35" tires on my 98' ex

    I've got 35's on mine with only 2" in the rear and about 2.5 in the front... Very minor trimming done and minimal rubbing as well... My tire size is 325/65/18... equivalent to a 34.6/12.8/18, but I could run a 35/12.50/18 very easily... Once I get the 3" body lift I'm going to be...
  22. NC-Expy

    Backwards third row seat

    Probably, like I said... mine's not physically possible without modification. Kind of bummed, but oh well. I'm not about to sit there and fabricate something just so I can put my seat differently. If anything, I'd buy one from an earlier model Expedition on Craigslist for like $60... People are...
  23. NC-Expy

    Backwards third row seat

    Yep, you are totally right. Doesn't work. Not on mine at least. You'd have to modify the the slots that are closer to the tail gate to be wider in order to accommodate for the side with the larger wheels on it. Don't know how else to make it work.
  24. NC-Expy

    Backwards third row seat

    This question is specifically towards Expeditionary but also applies to anyone that knows the answer... Do you have to modify anything to put the third row seat in facing backwards? The brackets on the seats themselves seem to be a little different, so was wondering if I needed to unbolt...
  25. NC-Expy

    from day 1 to today. Before and after pictures.

    Hmmm. Looks a little different than it used to be... can't quite put my finger on it though... Lol JK, tough, mean, and aggressive looking Expo man. I'll be running 37's when I get my 3" BL!
Top