junkyardmonkey
Member
- Joined
- Jan 28, 2008
- Posts
- 15
- Reaction score
- 0
My 2000 EB has OEM air suspension. The front air shocks were replaced back in May, for one was leaking badly.
Suddenly, the air suspension quit. First, the back failed to lift. A few days later, neither the front or back would lift. My wife says that she has heard the air compressor start once since that point in time. The Expy has always had some electrical problems.
Fuses are all good. I DO NOT have an electrical diagram. (Do you have one that includes the air suspension?) There are 4 wires in a connector that leads to the air compressor/drier. One has about 11V if the vehicle is on or off, but has minimal volts if the air suspension switch is turned off (like 0.3V). Another has 0.3V all the time. The other two show no voltage. This is using a DVM.
HELP!
Thank you so much!!
Suddenly, the air suspension quit. First, the back failed to lift. A few days later, neither the front or back would lift. My wife says that she has heard the air compressor start once since that point in time. The Expy has always had some electrical problems.
Fuses are all good. I DO NOT have an electrical diagram. (Do you have one that includes the air suspension?) There are 4 wires in a connector that leads to the air compressor/drier. One has about 11V if the vehicle is on or off, but has minimal volts if the air suspension switch is turned off (like 0.3V). Another has 0.3V all the time. The other two show no voltage. This is using a DVM.
HELP!
- Do you have an electrical diagram that includes the air suspenstion?
- How can I test the air compressor? Where should I apply voltage?
- How can I test the solenoid valve (or do I need to)? Where is it?
- What else could be the problem? This system is not tied into the computer, right? It is just a basic circuit with each switch doing its own thing, right?
Thank you so much!!