r stRratus
Member
ABS light is on expedition 2006, dont hear squeaking from brakes, or any grinding. Could it be the brake fluid??
ABS light is on
- Thread starter r stRratus
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
darmahsd
Full Access Members
Test sensors. One at each front wheel and one at rear differential. Test procedures at YouTube. And welcome to the forum!
Last edited:
mindgame
Full Access Members
If the 06 is anything like the 04. Then there are 4 speed sensors on each wheel hub, 2 front and 2 back.
https://www.youtube.com/watch?v=B8CE1y5-IX4
https://www.youtube.com/watch?v=B8CE1y5-IX4
B
bedrck46
Guest
Get the codes read should let you know which sensor is bad
B
bedrck46
Guest
If the 06 is anything like the 04. Then there are 4 speed sensors on each wheel hub, 2 front and 2 back.
https://www.youtube.com/watch?v=B8CE1y5-IX4
as mindgame stated there are Four sensors on the 06
Last edited by a moderator:
1997SCEBFEX
Full Access Members
can absolutely be the fluid level &/or sensor(s).
Let us know what you find.
PanHandler.
Let us know what you find.
PanHandler.
B
bedrck46
Guest
FYI
The 1st gen uses 3 sensors one at each front wheel and one at the rear differential
The 2nd gen uses 4 sensors one at each wheel
The 1st gen uses 3 sensors one at each front wheel and one at the rear differential
The 2nd gen uses 4 sensors one at each wheel
darmahsd
Full Access Members
I stand corrected. I had both. 3sensor information was for '97-2002 1rst gen.
I now have '05 with same ABS issue. 2 in front and on newer IRS, 2 in back.
I now have '05 with same ABS issue. 2 in front and on newer IRS, 2 in back.
