Can low-beam be adjusted separate from high-beam?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Aleks

Member
Joined
Aug 23, 2018
Posts
12
Reaction score
7
Location
Palo Alto, CA
Reading some reviews about low-beam lights not having enough reach - I wonder if they can be adjusted to project further without impacting high-beams?

I dealt with similar situation on minivan when upgrading to HID lights while keeping same projector housing - the pattern was not reaching out far enough. Unfortunately - while there was adjustment for light housing assembly - both high and low beams would be adjusted at the same time - so if I would raise low beam - it would make high beam almost unusable (project too high).

Any insights? I am particularly interested in LED version (On limited w/ 302A package) if that matters.

Thank you
 

1955moose

Full Access Members
Joined
Nov 23, 2014
Posts
6,004
Reaction score
1,351
Aren't they like the earlier versions of Expedition with one bulb controlling both? If you have running lights like my first edition, you can Crank those up higher, like I did, makes a huge difference. I don't even use my high beams, it's actually better with low beams and fog lights going. Something to think about.

Sent from my N9131 using Tapatalk
 

aggiegrad05

Full Access Members
Joined
Nov 6, 2017
Posts
1,833
Reaction score
1,390
Location
North Texas
Reading some reviews about low-beam lights not having enough reach - I wonder if they can be adjusted to project further without impacting high-beams?

I dealt with similar situation on minivan when upgrading to HID lights while keeping same projector housing - the pattern was not reaching out far enough. Unfortunately - while there was adjustment for light housing assembly - both high and low beams would be adjusted at the same time - so if I would raise low beam - it would make high beam almost unusable (project too high).

Any insights? I am particularly interested in LED version (On limited w/ 302A package) if that matters.

Thank you

I am fairly certain the complaints on here regarding the headlights are limited to the standard halogen setup. If I’m wrong and some of the folks running the LEDs are also unhappy, I apologize for the incorrect information.

(FWIW: I have the LEDs and think they’re wonderful. A buddy and I were driving back from dove hunting last night and he mentioned how awesome the headlights were both in their brightness and range.)
 
Top