Drivers power window has me stumped.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BucktailPath

Member
Joined
Sep 30, 2015
Posts
6
Reaction score
0
Location
Scotts Valley, CA
1999 Expedition Eddie Bauer 4x4 and 5.4.

Bought this recently and the drivers side power window wont work. I purchased it with this issue which happened to the previous owner a week before. All other windows work perfectly. When the drivers front window is pushed I hear a click from the relay under the dash and nothing else.

Pulled the window motor and bench tested it. Runs fine both ways.

Replaced the switch with one from a junkyard. No change.

Replaced the clicking relay with another one. Same click but no movement.

Checked all fuses and they are good.

So I feel out of ideas. What else can I check?
 

Bedrck47

Full Access Members
Joined
Jul 4, 2014
Posts
5,639
Reaction score
659
Location
Elizebethtown, PA
Single power windows are inoperative
Circuitry.
RF, LR, or RR window regulator control switch.
RF, LR, or RR window regulator electric drive.
LF window regulator control switch.



The one touch down feature is inoperative
Circuitry.
Battery saver relay.
CJB.
One touch down relay.
LF window regulator control switch.
LF window regulator electric drive (23394).
GEM.
 

Bedrck47

Full Access Members
Joined
Jul 4, 2014
Posts
5,639
Reaction score
659
Location
Elizebethtown, PA
There are 5 relays in the central junction box under dash Which one did you change?


Visual Inspection Chart Mechanical Electrical
Window regulator electric drive
Window glass
Vent window motor
Central junction box (CJB) Fuse:
6 (5A)
8 (5A)
15 (5A)
17 (10A)
18 (5A)
20 (5A)
Battery junction box (BJB) Fuse:
103 (50A)
110 (30A)
116 (40A)
601 (30A)
Relay(s)
Window regulator control switch
Window regulator electric drive
Vent window switch
Vent window motor
Heated mirror
Heat grid switch
Heat backlite grid
CJB
GEM
Circuitry
Wiring harness
Loose or corroded connector

Check all of the fuses listed above Use a meter to check fuses
 
Top