I have two 3rd tail lamp assemblies plus harnesses for 1st gen expedition. Not sure if they work on other Ford models.
Here are a few pics. I also just found a third harness.
1st/Better set: I'd say conservatively an A-. Good connector, great harness and T10 sockets and lamp assembly in great shape. $40 + snail mail, or can use you shipping account.
2nd set, sort of a project: due to the fun factor and the exuberant feeling of achievement once complete and functional I believe $32.50 is fair + snail mail or use your shipping account.
Get the whole enchilada (2 assemblies all 3 harnesses - you have a spare) for $62.50 + snail mail or use your shipping account.
I'm selling these because I traded in for an '03 and also got canned from work. Trying to get a few bucks. I'm getting a little skinnier (seriously)
I'll bubble wrap the crap out of them to be sure they are not damaged in transit.
Any questions or need more pics please let me know. I'll follow this thread closely and reply as quickly as possible. Most likely by the next day if not sooner.
More descriptions/pics:
First harness/assembly: I'd call an A-. Good connector, harness in great shape, Third T10 socket shows a little heat, but over all great condition. I'd like to place this part with the better of the two assemblies.
Pics:
Second harness(es)/assembly; A bit rougher. I'd give the harness combo maybe a C+ to B-. I'll include two harnesses. One harness has the 'leads' to put into plastic connector but has rough T10 sockets. Second harness included has fairly clean T10 sockets but seller cut the connector and 5 3/4" of wire off with it. I'm sure most if not all here can whip out the soldering iron and make a good harness from the two and take the grey connector off their existing one. Connector just has that red plastic clip that pops out then work the leads out.
The assembly has a small chip on one end, but I still have it - pic attached. I never tried to glue it.
Pics:
Here are a few pics. I also just found a third harness.
1st/Better set: I'd say conservatively an A-. Good connector, great harness and T10 sockets and lamp assembly in great shape. $40 + snail mail, or can use you shipping account.
2nd set, sort of a project: due to the fun factor and the exuberant feeling of achievement once complete and functional I believe $32.50 is fair + snail mail or use your shipping account.
Get the whole enchilada (2 assemblies all 3 harnesses - you have a spare) for $62.50 + snail mail or use your shipping account.
I'm selling these because I traded in for an '03 and also got canned from work. Trying to get a few bucks. I'm getting a little skinnier (seriously)
I'll bubble wrap the crap out of them to be sure they are not damaged in transit.
Any questions or need more pics please let me know. I'll follow this thread closely and reply as quickly as possible. Most likely by the next day if not sooner.
More descriptions/pics:
First harness/assembly: I'd call an A-. Good connector, harness in great shape, Third T10 socket shows a little heat, but over all great condition. I'd like to place this part with the better of the two assemblies.
Pics:
Second harness(es)/assembly; A bit rougher. I'd give the harness combo maybe a C+ to B-. I'll include two harnesses. One harness has the 'leads' to put into plastic connector but has rough T10 sockets. Second harness included has fairly clean T10 sockets but seller cut the connector and 5 3/4" of wire off with it. I'm sure most if not all here can whip out the soldering iron and make a good harness from the two and take the grey connector off their existing one. Connector just has that red plastic clip that pops out then work the leads out.
The assembly has a small chip on one end, but I still have it - pic attached. I never tried to glue it.
Pics:
Last edited:
