Install power point door
- Thread starter jimisler
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
walnuts4x4
Full Access Members
are you talking about the power window switch or the entire door? also what year is it?
power point
I'm talking about the 12v powerpoint on the dash board. It looks and works like a cigarettel lighter. Someone broke the little door off, so I bought a replacement, thinking it installed from the face. Apparently not.
I'm talking about the 12v powerpoint on the dash board. It looks and works like a cigarettel lighter. Someone broke the little door off, so I bought a replacement, thinking it installed from the face. Apparently not.
walnuts4x4
Full Access Members
hmmm I'll have to look and see what I can find... sorry about being confused about your first post.... little one was climbing on me and I read it wrong... what year expy do you have?
RI-Matt
Full Access Members
Not sure if this helps but ....
I think to remove the black part you have to remove the inner part first, then gain access to the back, which you might be able to get from the glove box or by removing the center stack that houses the radio, then reach around and remove it from the backside. Should be held on with tabs.
Matt
I think to remove the black part you have to remove the inner part first, then gain access to the back, which you might be able to get from the glove box or by removing the center stack that houses the radio, then reach around and remove it from the backside. Should be held on with tabs.
Matt
