Lifted Expeditions of EF.com (picture post)

[Gruz7]

Took her out to play in a little mud



View attachment 7162



View attachment 7163



View attachment 7164



View attachment 7165

What's the sticker on your back window???


Sent from my iPhone using Tapatalk

 

[BIG GREEN FORD]

My daughter loves my truck

 

[fiveohpoepoe]

3/2 Ready Lift, 17x10 Fuel Mavericks on 295 Nitto Grapplers

 

[Mikes05expy]

3/2 Ready Lift, 17x10 Fuel Mavericks on 295 Nitto Grapplers

Looks good

 

[Am3ricanInfid3L]

I'll go ahead and toss mine up here. It's nothing to fancy, but it's practical for my clearance needs. I'm running 285/75 R16's. My wheel wells offer a generous amount of space, so the tires have plenty of room (even when turning during a full flex). More details in sig.

 

[tangledwater]

hey all, I'm new here. I see some very nice looking expy's.

I ordered the ready lift 3/2 today. I was wondering, for those who used the 3/2 ready lift, on the product description it says "no cutting or drilling" but in the directions i found it says to drill a new hole lower for the breakline bracket, so my question is is that really necessary?? since i dont have a drill i wanted to make sure before i do the install.

*edit* forgot to mention this is a 2013 xlt.

 

[tangledwater]

anybody??

 

[Lane24]

anybody??

Maybe start a thread on this subject. This is more of a showcase/picture thread than a troubleshooting one. You will probably get more of a response in the suspension area of the forum.

 

[Brett]

Trailmaster Suspension Lift - 365/65/R18 Nitto Terra Grappler G2's

 

[Gruz7]

Looks nice Brett


Sent from my iPhone using Tapatalk

 

[Brett]

Looks nice Brett


Sent from my iPhone using Tapatalk

Thanks!

Putting the new front/rear bumpers and basket roof rack on next week. I'll add more pictures soon!

 

[Gruz7]

Dig it I gotta Yakima mega and it's perfect... But be sure to keep posting pics!


Sent from my iPhone using Tapatalk

 

[samrider777]

Envoyé de mon iPhone en utilisant Tapatalk

 

[samrider777]

Envoyé de mon iPhone en utilisant Tapatalk

 

[handmedwnXpo]

Hello, I've gone threw this whole thread, and have really enjoyed it, getting ideas for my 04, and my big question is, the running boards, are they a must be removed thing if I go with the 3/2 lift, or is it something that will depend on what wheel and tire setup I go with. I've seen 2nd gen expos lifted both with boards on, but most of them off, I wont be doing much hard off-roading since the rig is only Rwd, is it a clearance thing? TIA.

 

[Gruz7]

Hello, I've gone threw this whole thread, and have really enjoyed it, getting ideas for my 04, and my big question is, the running boards, are they a must be removed thing if I go with the 3/2 lift, or is it something that will depend on what wheel and tire setup I go with. I've seen 2nd gen expos lifted both with boards on, but most of them off, I wont be doing much hard off-roading since the rig is only Rwd, is it a clearance thing? TIA.

The boards can be kept on depending on the tire size but if you go too big they may need to be cut... I think 33s you will be all set but if you were to go bigger then they'd need to be removed or trimmed


Sent from my iPhone using Tapatalk

 

[diablood5]

new look

just finished it

 

[Armstrongj]

03 expedition 305/65-17 cooper stt pro's with 17x9 XD misfit wheels

 

[Kuestick]

Can this be done to a 2011 2wd

 

[WarrenG]

I'm still trying to figure out how to add pics.... Hopefully this worked.





How do you get the thumbnail picture frame like above my post?