Looking for Pinout for abs module connector to diagnose abs light

[MapleTSyrup]

I'm looking in the Ford Service Manual and it says

Disconnect: Anti-Lock Brake Control Module C135. z
Key in ON position. z
Measure the voltage between anti-lock brake control module C135 pins, harness and ground as follows: z
Are the voltages greater than 10 volts?
Pin Circuit 1 534 (YE/LG) 4 533 (TN/RD) 32 532 (OG/YE)

I'm not seeing anything in the manual that says which number is which pin on the connector. Does anyone know what page I would find that on?

 

[Hamfisted]

Do you have a laptop and the ForScan app ? It will tell you what is triggering your ABS light. Also, many of the mid-level and up code readers can read ABS codes.


ForScan Free Download Link

Innova Code Reader (ABS) on Amazon


.

 

[MapleTSyrup]

Yes I have a B1676 power voltage out of range code and a C1175 left rear wheel speed sensor code.

 

[MapleTSyrup]

So I think the B1676 code is related to the abs light being on. The instructions to diagnose need the pin out diagram for the connector on the abs module.

 

[BlackCoffee]

If you have all the shop manuals, the electrical connectors and wiring diagrams are in a separate manual.