Lug Nuts for 2017 Limited

[D Derr]

I want to replace the POS lugnuts that came on the stock, 20" wheels of my 2017 Limited. I do not want to replace with OEM type, obviously. Anyone have a recommendation?

Thanks in advance!

 

[crector080862]

Just go down to O'Reilly's or Advance Auto Part or your local automotive store and pick up some locking lugs that have the key I agree with you I just changed all my tires and the stock ones just suck

Sent from my SM-G892A using Tapatalk

 

[UncleDJ]

Be careful which ones you get. I bought a set off of e-bay that were solid, chrome, and they started rusting after a month.
I've seen where others have said to get 'em from one of the large retailers. I can't personally say they're any better.
I wanted to get stainless, but couldn't find any.

 

[D Derr]

Thanks for the replies. I will check out the local Auto Zone this week.

 

[Adieu]

Hell no dont do that.


They charge quadruple and sell the lowest quality shit


Go on amazon or a reputable dedicated custom truck parts online retailer.

 

[Yukon Joe]

I want to replace the POS lugnuts that came on the stock, 20" wheels of my 2017 Limited. I do not want to replace with OEM type, obviously. Anyone have a recommendation?

Thanks in advance!

Did you find what you're looking for.
I just bought some Gorilla Black chrome lid for my 18. A solid lug with no stupid chrome cap like the ford ones.

@Yukon Joe

Edit:
Here is the link.
https://www.summitracing.com/parts/gor-91107xlbc

^ these are the wrong lug thread. See post below.

 

[Uturn]

Also check on Amazon for lug nuts from DPAccessories. Have a set on my boat trailer for a couple of years including salt water trips with no issues.

 

[Yukon Joe]

Well, I was all excited to see a Summit box on the porch tonight. But to my dismay, the lug nuts I ordered are the wrong thread type.

Does anyone know the lug thread for the 18 Expedition?
I know the length is a bit longer, I'm ok with that, but these didn't fit at M14-2.0


@Yukon Joe

 

[JExpedition07]

You need acorn looking style so it displaces the load on your rim correctly too. They almost look like the little mustang ones although I doubt they’d be correct:

https://www.summitracing.com/parts/...MI7uariceE3QIVgyZpCh1fRwZxEAQYBSABEgJLSfD_BwE

 

[Yukon Joe]

You need acorn looking style so it displaces the load on your rim correctly too. They almost look like the little mustang ones although I doubt they’d be correct:

https://www.summitracing.com/parts/...MI7uariceE3QIVgyZpCh1fRwZxEAQYBSABEgJLSfD_BwE

$50 bucks for five, wholly ****.

I did buy the acorn style, it has the 60 degrees, although, it does look much smaller.
I'm bummed I got the wrong ones. I went by looking up the ford part number, but it didn't work out. Still need to know the thread pitch.

@Yukon Joe

 

[marlinpruett]

I want to replace the POS lugnuts that came on the stock, 20" wheels of my 2017 Limited. I do not want to replace with OEM type, obviously. Anyone have a recommendation?

Thanks in advance!

I just bought a 24 nut set from DPAcessories for my 2007 Expedition EL. They are really nice and look to be quality.

They have this warranty.
Backed by a manufacturer warranty against rust and defects of workmanship and materials for a period of one year from the date of shipment.

 

[marlinpruett]

Sorry duplicate post

 

[Yukon Joe]

I just bought a 24 nut set from DPAcessories for my 2007 Expedition EL. They are really nice and look to be quality.

What's the part number?

@Yukon Joe

 

[marlinpruett]

Duplicate, Sorry did it again!

 

[marlinpruett]

What's the part number?

@Yukon Joe

24 Chrome Wheel Lug Nuts for most Ford Lincoln Trucks SUVs 4L3Z1012A 7L1Z1012A
Here is a link from Ebay.
https://www.ebay.com/itm/24-Chrome-...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

 

[Uturn]

Looks like the wrong pitch. Factory is M14 x 1.5. I show the factory part number as 2L1Z-1012-AA

 

[sjwelds]

Depends on the year.

@ExpeditionAndy

 

[marlinpruett]

Looks like the wrong pitch. Factory is M14 x 1.5. I show the factory part number as 2L1Z-1012-AA

Mine were for the 2007 model, you should double check your year and model with them.

 

[Uturn]

Mine were for the 2007 model, you should double check your year and model with them.

This part number fits 2014 and up Expeditions.

 

[East-TN]

Here’s the lugnuts for 2015 and up...I just ordered these for my 2017.

https://smile.amazon.com/gp/product/B00ZQ7ZV4C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1